| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 15 |
| Registration plate issues | 14 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Upper Fork yoke deformed |2.1.1b| | 1 |
| Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Offside Front suspension assembly component loose |2.3.1| | 1 |
| Horn not working |1.7.3a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Nearside Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Offside Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake pedal mounting insecure |3.1.2a| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Registration plate lamp issues | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Lower Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Footrest insecure (6.2.12 (a)) | 1 |
| Centre Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Suspension attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Front Steering headbearing has excessive free play (2.2.2) | 1 |
| Exhaust markings indicating not for road use or similar wording (7.1.4) | 1 |
| Nearside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
| Offside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
| Steering headbearing has excessive free play (2.2.2) | 1 |
| Rear Roller brake test indicates a binding brake (3.3.A1a) | 1 |
| Exhaust is leaking and excessively noisey (7.1.1b) | 1 |
| Offside Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Brake excessively binding BOTH. (1.2.1 (f)) | 1 |
| Offside Front Upper Throttle operating incorrectly sticking throttle - cables to tight - freed off to correct (6.2.7 (a) (i)) | 1 |
| Central Rear Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |