| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 23 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 14 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Registration plate issues | 12 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 10 |
| Front wheel bearings have excessive free play |2.3.5b| | 10 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 10 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Steering headbearing has excessive free play |2.2.2| | 7 |
| Front wheel bearings are excessively rough |2.3.5b| | 7 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
| Throttle operating incorrectly |6.2.1f| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front Brake excessively binding (1.2.1 (f)) | 4 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Rear Brake disc|s| cracked |3.2.A1g| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Rear Brake excessively binding (1.2.1 (f)) | 3 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 3 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Exhaust excessively deteriorated |7.1.1a| | 2 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Rear Drive chain excessively tight |6.2.1d| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Indicator tell tale not functioning |1.5.2| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Horn not working (7.7 (a)) | 2 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Offside Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Brake component has an inadequate repair |3.1.5| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| Horn not working |1.7.3a| | 1 |
| Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Offside Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
| Motorcycle structure cracked rear frame |6.1.1a| | 1 |
| Nearside Rear Brake hose excessively twisted |1.1.12 |b| |ii|| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Central Front Position lamp not working |4.2.1 |a|| | 1 |
| Offside Front Handlebar deformed |2.1.1b| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Front Brake locking device insecure |3.2.A1e| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Upper Fork yoke deformed |2.1.1b| | 1 |
| Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Offside Lower Motorcycle structure cracked |6.1.1a| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Stop lamp switch with a delay in operation control 2 |4.3.2 |a| |ii|| | 1 |
| Throttle operating incorrectly heated grip hitting tank |6.2.7 |a| |i|| | 1 |
| Handlebar grip insecure to handlebar throttle grip loose |2.2.1 |d| |ii|| | 1 |
| Rear Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Offside Front Footrest missing |6.2.1a| | 1 |
| Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Nearside Front Direction indicator deteriorated and function impaired dim output |1.5.3a| | 1 |
| Nearside Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Stop lamp adversely affected by the operation of another lamp |4.3.3 |b|| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Nearside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Upper Indicator tell tale not operating correctly |1.5.2| | 1 |
| Indicator tell tale not operating correctly |1.5.2| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Brake caliper inadequately mounted calliper bracket locking device missing |1.1.16 |c| |i|| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Central Front Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Brake hose damaged and likely to fail |1.1.12 |a|| | 1 |
| Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Rear Brake pedal insecure |1.1.2 |e| |i|| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Offside Front Upper Handlebar deformed SLIGHT BEND IN HANDBAR |2.1.1b| | 1 |
| Offside Front Upper Fork yoke cracked |2.1.1b| | 1 |
| Nearside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Front Exhaust mounting missing |7.1.1c| | 1 |
| Rear Wheel hub excessively worn (5.2.1 (b) (i)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Steering movement excessively notchy with the wheel raised (2.2.1b) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Road spring main leaf fractured (5.3.1 (b) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Brake disc significantly and obviously worn FRONT DISCS EXCESSIVELY WORN AFFECTING BRAKING PERFORMANCE.WARPAGE EVIDENT. (1.1.14 (a) (i)) | 1 |
| Brake indicates excessive fluctuation of brake effort FRONT BRAKE DISCS HAVE EXCESSIVE WARPAGE EVIDENT. (1.2.1 (e)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls hand lever (4.3.2 (a) (iii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear Motorcycle structure has a fracture which is likely to adversely affect braking or steering (6.1.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Headlamp aim projected beam image obviously incorrect Both bulbs incorrectly fitted. (4.1.2 (c)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Stop lamp not working not operating on front or rear brake (4.3.1 (a) (ii)) | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |