Most common failures | No# failures |
---|
Headlamp aim out of alignment | 30 |
Horn not working |1.7.3a| | 16 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Registration plate issues | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Front Hydraulic brake control feels spongy |3.1.4a| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Front suspension has inadequate damping effect. |2.3.6c| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front Horn not working |1.7.3a| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Brake hose excessively deteriorated | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Exhaust is leaking and excessively noisey (7.1.1b) | 2 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Shock absorber has negligible damping effect Seized ! |5.3.2 |b|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
Position lamp not working Tail lamp |4.2.1 |a|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
An item not tested |Manual| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Brake hose excessively twisted |3.2.B3a| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Handlebar excessively corroded |2.1.1b| | 1 |
Centre Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Front Brake hose fouling |3.2.B3b| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear mono-shock pivot seized |2.4.B.4| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Offside Motorcycle structure excessively corroded |6.1.1a| | 1 |
Nearside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Offside Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Headlamp aim not tested |1.6| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Nearside Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Offside Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Offside Brake reaction bracket insecure |3.2.A1j| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Brake lever insecure |1.1.2 |e| |i|| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Central Front Upper Horn not working (7.7 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Front Brake lever has inadequate reserve travel (3.1.3b) | 1 |
Offside Handlebar mounting clamp loose (2.1.1a) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Brake caliper insecure (1.1.16 (c) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Horn not working (7.7 (a)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake clevis joint insecure (1.1.15 (c)) | 1 |