>

MOT History from tests of petrol HONDA ST1300ABSs year 2006

Review the list of common HONDA ST1300ABS failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:93.82%
(The average a petrol HONDA ST1300ABS year 2006 passes without issue)
Based on:971 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment13
Front Roller brake test indicates a binding brake |3.3.A1a|3
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Registration plate issues2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Offside Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Front wheel spindle securing nut|s| loose |2.3.3a|1
Front Valve stem seriously damaged (5.2.3 (j))1
Front Fairings insecure and likely to impede the steering |2.1.2e|1
Nearside Front suspension assembly component loose |2.3.1|1
Fuel cap mounting flange/sealing method defective |7.2.2c|1
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Offside Front Direction indicator not working |1.5.1c|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Exhaust mounting missing |7.1.1c|1
Nearside Front Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))1
Offside Front Direction indicators not working |1.5.1c|1
Front Stop lamp does not illuminate immediately a brake applies Front brake light switch faulty |1.3.1a|1
Front Hydraulic brake control creeps under load. |3.1.4a|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Central Rear Lower Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Direction indicator flashing less than 60 times a minute |1.5.1c|1
Throttle operating incorrectly |6.2.1f|1
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Nearside Front Direction indicator not working |4.4.1 |a| |ii||1
Nearside Rear Direction indicator not working |4.4.1 |a| |ii||1
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b))1
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a))1
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Centre Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear Brake grabbing severely |1.2.1 |c||1
Front Stop lamp not working |4.3.1 |a| |ii||1
Front Brake excessively binding |1.2.1 |f||1
Rear Brake excessively binding |1.2.1 |f||1
Brake pedal has insufficient reserve travel foot brake lever. |1.1.2 |a||1
Front Roller brake test indicates a sticking brake |3.3.A1a|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Nearside Front Shock absorber has a serious fluid leak left-hand fork seal leaking fluid |5.3.2 |b||1
Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c|1
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Nearside Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Outer Rear Rear reflector on motorcycle insecure |1.4.2c|1
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Nearside Front Upper Headlamp incorrect colour |1.2.1|1
Nearside Front Front wheel bearings have excessive free play |2.3.5b|1
Offside Front Direction indicator not working (4.4.1 (a) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy