>

MOT History from tests of petrol HONDA ST1100Ls year 1990

Review the list of common HONDA ST1100L failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:81.35%
(The average a petrol HONDA ST1100L year 1990 passes without issue)
Based on:2,799 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment62
Front Roller brake test indicates a binding brake |3.3.A1a|46
Rear Roller brake test indicates a binding brake |3.3.A1a|33
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|27
Stop lamp does not illuminate immediately a brake applies |1.3.1a|20
Front position lamp does not illuminate immediately when switched on |1.1.3a|20
Throttle operating incorrectly |6.2.1f|15
Front wheel bearings have excessive free play |2.3.5b|14
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|14
Registration plate issues13
Nearside Front shock absorber seal failed and leaking oil |2.3.3|13
Offside Front shock absorber seal failed and leaking oil |2.3.3|13
Rear suspension component excessively corroded. |2.4.A.1a|12
Rear Brake disc|s| excessively worn |3.2.A1l|12
Rear wheel bearings have excessive free play |2.4.A.2c|11
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|9
Steering movement excessively `notchy` with the wheel raised |2.2.1b|9
Exhaust is leaking and excessively noisey |7.1.1b|9
Rear Motorcycle structure excessively corroded |6.1.1a|9
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||8
Front Floor brake test indicates a binding brake |3.3.C2c|8
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|7
Offside Front Brake disc|s| cracked |3.2.A1g|7
Nearside Front Brake disc|s| cracked |3.2.A1g|7
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|6
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|6
Rear Floor brake test indicates a binding brake |3.3.C2c|6
Front wheel bearings are excessively rough |2.3.5b|5
Front Position lamp not working (4.2.1 (a))5
Horn not working |1.7.3a|5
Front shock absorber seal failed and leaking oil |2.3.3|5
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|5
Front Front wheel bearings have excessive free play |2.3.5b|5
Exhaust excessively deteriorated |7.1.1a|5
Front Roller brake test indicates a sticking brake |3.3.A1a|4
Rear reflector on motorcycle missing |1.4.1|4
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|4
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|4
Front Stop lamp not working (4.3.1 (a) (ii))4
Front Brake excessively binding (1.2.1 (f))4
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||4
Brake hose excessively deteriorated4
Headlamp switch faulty |1.2.4|4
Offside Front Floor brake test indicates a binding brake |3.3.C2c|3
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d|3
Rear Roller brake test indicates a sticking brake |3.3.A1a|3
Nearside Front Direction indicator not working |1.5.1c|3
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|3
Motorcycle structure excessively corroded |6.1.1a|3
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))3
Rear Brake excessively binding (1.2.1 (f))3
Rear shock absorber seal failed and leaking oil |2.4.A.1c|3
Rear shock absorber has inadequate damping effect. |2.4.A.3b|3
Brake pedal cannot be released smoothly |3.1.3d|3
Stop lamp remains on when the brake is released |1.3.1e|3
Steering headbearing has excessive free play |2.2.2|3
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Offside Front Roller brake test indicates a binding brake |3.3.A1a|2
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Front Front wheel bearings are excessively rough |2.3.5b|2
Front Front shock absorber seal failed and leaking oil |2.3.3|2
Offside Front Brake excessively binding |1.2.1 |f||2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Rear Stop lamp not working (4.3.1 (a) (ii))2
Headlamp aim not tested (4.1.2 (b))2
Nearside Rear Exhaust mounting missing |7.1.1c|2
Front Plate brake test indicates a binding brake |3.3.B1a|2
Rear Plate brake test indicates a binding brake |3.3.B1a|2
Rear Rear suspension component excessively corroded. |2.4.A.1a|2
Centre Exhaust excessively deteriorated |7.1.1a|2
Headlamp not working on dipped beam (4.1.1 (a) (ii))2
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|2
Offside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j|2
Offside Front Direction indicator incorrect colour |1.5.1b|2
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|2
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|2
Rear Stop lamp not working |1.2.1b|2
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))2
Front Wheel bearing has excessive play |5.1.3 |a| |i||2
Offside Front Brake disc fractured |1.1.14 |a| |ii||2
Rear suspension has an inadequate repair of a load bearing member or its supporting structure. |2.4.A.2d|2
Headlamp aim beam image kick up to the offside |1.6|2
An item not tested |Manual|2
Rear suspension bush has excessive free play |2.4.A2a|i||2
Front position lamp incorrect colour |1.1.2a|2
Front Floor brake test indicates a sticking brake |3.3.C2c|2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Rear Brake disc|s| cracked |3.2.A1g|2
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||2
Rear Brake excessively binding |1.2.1 |f||2
Nearside Front Brake hose which buldges |3.2.B4|2
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|2
Horn not working (7.7 (a) (ii))2
Throttle operating incorrectly (6.2.7 (a) (i))2
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))2
Rear wheel rotation likely to be impeded |6.2.1b|2
Offside Front Brake pipe union leaking fluid |3.2.B4|2
Floor brake test indicates a binding brake |3.3.C2c|2
Offside Front Direction indicator not working |1.5.1c|2
Rear Stop lamp not working |4.3.1 |a| |ii||2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy