| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 11 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Motorcycle structure excessively corroded |6.1.1a| | 3 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Registration plate issues | 3 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Brake disc|s| cracked |3.2.A1g| | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Horn not working |1.7.3a| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Rear parking brake recording little or no effort | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Nearside Front Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
| Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
| Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced swing arm |6.1.1 |c| |i|| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Indicator switch insecure |1.5.4| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear suspension has an inadequate repair of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Central Front Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Offside Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake fluid reservoir fluid level significantly below minimum level hose clip loose and leaking fluid (1.1.10 (d) (ii)) | 1 |
| Rear Brake pedal has insufficient reserve travel needs bleeding (1.1.2 (a)) | 1 |
| Throttle operating incorrectly not returning (6.2.7 (a) (i)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Steering operation impeded by a fairing (2.1.4 (e)) | 1 |
| Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Brake hose damaged | 1 |
| Offside Front Brake disc contaminated fork oil (1.1.14 (b)) | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Rear Shock absorber insecure |2.7.2b| | 1 |
| Hazard warning lamps not fitted |1.4.B.1a| | 1 |
| Nearside Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Parking brake lever inappropriately modified Brake cable incorrectly located at lever end. |3.1.8| | 1 |
| Brake clevis joint locking device missing Brake cable clevis pin has no locking device. |3.5.1l| | 1 |
| Front position lamp|s| missing Both not fitted. |1.1.A.3a| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| An item not tested |Manual| | 1 |
| Brake linked system has a seized master cylinder pivot. |3.2.B5| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Exhaust has a major leak of exhaust gases leak at n/s silencer joint |6.1.2 |a|| | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Nearside Exhaust is leaking and excessively noisey Silencer snapped |7.1.1b| | 1 |
| Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Brake reaction bracket insecure |3.2.A1j| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front position lamp does not illuminate immediately when switched on full beam |1.1.3a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Stop lamp(s) not working not working off hand lever (4.3.1 (a) (ii)) | 1 |
| Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected Excessive notch in centre |2.2.2 |f| |ii|| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort Rear brake uneven on application |1.2.1 |e|| | 1 |
| Offside Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Centre Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Stop lamp not working from front brake (4.3.1 (a) (ii)) | 1 |
| Central Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |