Most common failures | No# failures |
---|
Headlamp aim out of alignment | 72 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 31 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 27 |
Rear reflector on motorcycle missing |1.4.1| | 26 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
Registration plate issues | 18 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 13 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 13 |
Drive chain excessively loose |6.2.1d| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 11 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 11 |
Horn not working |1.7.3a| | 11 |
Steering headbearing has excessive free play |2.2.2| | 10 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 10 |
Rear Rear reflector on motorcycle missing |1.4.1| | 9 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 8 |
Rear reflector missing (4.8.2 (a) (ii)) | 7 |
Drive chain excessively tight |6.2.1d| | 7 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 7 |
Drive chain worn to excess |6.2.1e| | 7 |
Stop lamp remains on when the brakes are released | 7 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 7 |
Throttle operating incorrectly |6.2.1f| | 6 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Stop lamp remains on when the brake is released |1.3.1e| | 6 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Rear Position lamp not working (4.2.1 (a)) | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 5 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Indicator switch insecure |1.5.4| | 4 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Registration plate lamp issues | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Chain guard insecure |6.2.1c| | 2 |
Offside Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Nearside Throttle operating incorrectly |6.2.1f| | 2 |
Horn is not a constant note |1.7.3c| | 2 |
Position lamp switch insecure |1.1.4b| | 2 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |