Most common failures | No# failures |
---|
Registration plate issues | 10 |
Registration plate lamp issues | 5 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Headlamp aim out of alignment | 4 |
Front Brake excessively binding |1.2.1 |f|| | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Riders seat insecure (6.2.5 (a) (ii)) | 2 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Offside Front Position lamp not working (4.2.1 (a)) | 2 |
Fuel cap missing |7.2.2a| | 1 |
Nearside Rear Brake lever attachment screws loose |3.1.2b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak Fork seal (5.3.2 (b)) | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Stop lamp remains on when the brake is released control |1.3.1e| | 1 |
Front Stop lamp not working control |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp likely to become detached (4.3.1 (c) (ii)) | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Brake cable guide defective and affecting operation (1.1.15 (d)) | 1 |
Front Brake grabbing severely |1.2.1 |c|| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
Suspension attachment bracket/mounting insecure Mounting bolt missing. (5.3.3 (a) (i)) | 1 |
Brake lever insecure rear brake lever insecure. |3.1.2a| | 1 |
Rear Brake lagging in operation |1.2.1 |d|| | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake lining|s| less than 1.0 mm thick |1.1.13 |a|| | 1 |
Front position lamp incorrect colour blue running led lights fitted,covered for mot test |1.1.2a| | 1 |
Rear Brake lever has inadequate reserve travel brake adjusted during mot |3.1.3b| | 1 |
Front Brake lever cannot be applied smoothly front brake pivot greased during mot to cure notchiness. |3.1.3d| | 1 |
Brake lever has inadequate reserve travel front brake. |3.1.3b| | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Roller brake test indicates a binding brake front brake binding. |3.3.A1a| | 1 |
Stop lamp does not illuminate immediately a brake applies both controls |1.3.1a| | 1 |
Rear shock absorber has inadequate damping effect. both |2.4.A.3b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
Motorcycle structure joining/attachment plate or fastening insecure Refers to wooden mount for delivery box fitment, box has been removed remaining wooden mount leaving sharp edges and protruding beyond rear of motorcycle , metal brackets and wood need to be removed |6.1.1 |b| |i|| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Front Roller brake test indicates a binding brake front brake binding |3.3.A1a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort rear brake excessive fluctuation |3.3.A1d| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 1 |
Horn not working |1.7.3a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake lever pivot excessively tight front brake operation not smooth |1.1.1 |a|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |