| Most common failures | No# failures |
|---|
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Headlamp aim out of alignment | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Exhaust excessively deteriorated |7.1.1a| | 2 |
| Front Brake excessively binding |1.2.1 |f|| | 2 |
| Registration plate issues | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Offside Front Shock absorber has a serious fluid leak Fluid leaking down shock and onto brake lines. (5.3.2 (b)) | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Nearside Rear Upper Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Motorcycle structure excessively corroded rear swing arm severely rusted through |6.1.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies handlebar brake |control one| not operating brake lights |1.3.1a| | 1 |
| Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Centre Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Centre Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Nearside Rear Brake caliper leaking weaping rear brake cylinder |1.1.16 |b| |i|| | 1 |
| Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Nearside Front Brake cylinder severely corroded |3.2.B1b| | 1 |
| Offside Front Brake cylinder severely corroded |3.2.B1b| | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |