Most common failures | No# failures |
---|
Headlamp aim out of alignment | 52 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 24 |
Throttle operating incorrectly |6.2.1f| | 21 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 18 |
Registration plate issues | 15 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 14 |
Front wheel bearings have excessive free play |2.3.5b| | 13 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 12 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Handlebar deformed |2.1.1b| | 11 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 10 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 10 |
Front wheel bearings are excessively rough |2.3.5b| | 9 |
Steering headbearing has excessive free play |2.2.2| | 8 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Offside Front Direction indicator not working |1.5.1c| | 6 |
Headlamp aim beam image kick up to the offside |1.6| | 6 |
Exhaust excessively deteriorated |7.1.1a| | 6 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
Offside Rear Footrest insecure |6.2.1a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 5 |
Nearside Footrest insecure |6.2.1a| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Offside Footrest insecure |6.2.1a| | 4 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 3 |
Front Brake disc|s| cracked |3.2.A1g| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Offside Rear Direction indicator insecure |1.5.3b| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
An item not tested |Manual| | 3 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Offside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front position lamp missing |1.1.1a| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Nearside Steering lock stop ineffective |2.1.3| | 2 |
Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Headlamp aim not tested |1.6| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Brake hose leaking fluid |3.2.B4| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Horn not working |1.7.3a| | 2 |
Headlamp incorrect colour |1.2.1| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Handlebar deformed |2.1.1b| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Headlamp switch insecure |1.2.4| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Headlamp insecure (4.1.1 (c)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |