Most common failures | No# failures |
---|
Headlamp aim out of alignment | 234 |
Registration plate issues | 89 |
Registration plate lamp issues | 60 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 43 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 40 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 40 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 39 |
Stop lamp remains on when the brakes are released | 37 |
Front Brake excessively binding (1.2.1 (f)) | 35 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 34 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 33 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 32 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 32 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 32 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 31 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 30 |
Steering headbearing has excessive free play |2.2.2| | 30 |
Stop lamp not working (4.3.1 (a) (ii)) | 29 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 29 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 27 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 21 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 20 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 20 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 20 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 19 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 19 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 18 |
Headlamp insecure |1.2.3b| | 17 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 17 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 16 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 16 |
Indicator tell tale not functioning |1.5.2| | 15 |
Front suspension has inadequate damping effect. |2.3.6c| | 15 |
Front Brake disc|s| excessively worn |3.2.A1l| | 15 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 15 |
Headlamp insecure (4.1.1 (c)) | 15 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 15 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 14 |
Front Brake excessively binding |1.2.1 |f|| | 13 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 11 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 11 |
Headlamp insecure |4.1.1 |c|| | 11 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 11 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 10 |
Stop lamp not working |4.3.1 |a| |ii|| | 10 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 10 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 10 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 10 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 10 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 9 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 8 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 8 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 8 |
Stop lamp remains on when the brake is released |1.3.1e| | 8 |
Front brake disc in such a condition that it is seriously weakened | 8 |
Horn not working (7.7 (a) (ii)) | 8 |
Front Brake disc contaminated (1.1.14 (b)) | 8 |
Nearside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 8 |
Offside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 8 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 8 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 8 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 7 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 7 |
Rear Position lamp not working (4.2.1 (a)) | 7 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 6 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Offside Front Position lamp not working (4.2.1 (a)) | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 5 |
Horn not working |7.7 |a| |ii|| | 5 |
Front Brake disc contaminated |1.1.14 |b|| | 5 |
Horn not working |1.7.3a| | 5 |
Nearside Front Position lamp not working (4.2.1 (a)) | 5 |
Headlamp aim not tested (4.1.2 (b)) | 5 |
Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 5 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 5 |
All direction indicators not working (4.4.1 (a) (ii)) | 5 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 5 |