| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 44 |
| Rear reflector on motorcycle missing |1.4.1| | 29 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 14 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 10 |
| Drive chain excessively loose |6.2.1d| | 10 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Registration plate issues | 7 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
| Steering headbearing has excessive free play |2.2.2| | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Throttle operating incorrectly |6.2.1f| | 6 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 5 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 5 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 4 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 4 |
| Front Steering headbearing has excessive free play |2.2.2| | 4 |
| Offside Rear Footrest missing |6.2.1a| | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Nearside Rear Footrest missing |6.2.1a| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 3 |
| Rear reflector on motorcycle obscured |1.4.1| | 3 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Offside Steering lock stop ineffective |2.1.3| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
| Front Front mudguard insecure |2.3.7| | 2 |
| Offside Footrest insecure |6.2.1a| | 2 |
| Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Rear Direction indicator not working |1.5.1c| | 2 |
| Brake pedal insecure |3.1.2a| | 2 |
| Horn not working |1.7.3a| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Nearside Direction indicator not working |1.5.1c| | 2 |
| Offside Direction indicator not working |1.5.1c| | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Front Footrest insecure |6.2.1a| | 2 |
| Brake pedal cannot be released smoothly |3.1.3d| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Front Headlamp insecure |1.2.3b| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Rear suspension component seized |2.4A2a|ii|| | 2 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Fuel system component insecure |7.2.1b| | 2 |
| Rear mono-shock insecure |2.4.B.4| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Front Upper Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Front Brake locking device insecure |3.2.A1e| | 1 |
| Offside Rear Exhaust mounting missing |7.1.1c| | 1 |
| Nearside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Brake lever is inoperative |3.1.3c| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Nearside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Steering lock stop maladjusted |2.1.3| | 1 |
| Offside Handlebar deformed |2.1.1b| | 1 |
| Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Front All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Rear All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Front All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| An item not tested |Manual| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Rear Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Rear Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Front Brake hose excessively twisted Brake hose affected by clutch cable |cable routed wrong| |1.1.12 |b| |ii|| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Brake pedal attachment screws missing. |3.1.2b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Fuel pipe union leaking |7.2.1a| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Centre Front Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Centre Rear Lower Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Nearside Steering lock stop maladjusted |2.1.3| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Nearside Rear Direction indicator obscured |1.5.1a| | 1 |
| Offside Rear Direction indicator obscured |1.5.1a| | 1 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Headlamp switch insecure |1.2.4| | 1 |
| Offside Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Nearside Front Brake hose leaking fluid |3.2.B4| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Centre Rear Upper Drive chain excessively loose |6.2.1d| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Nearside Front suspension assembly component missing |2.3.1| | 1 |
| Offside Front suspension assembly component missing |2.3.1| | 1 |
| Lower Front suspension assembly component loose |2.3.1| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Upper Fuel hose leaking |7.2.1a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Brake lever excessively damaged |3.2.A1c| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
| Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Rear Rear suspension component loose |2.4.A.1a| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Brake pedal mounting cracked . |3.1.2c| | 1 |
| Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Front Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
| Rear Rear suspension component misaligned |2.4.A.1a| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Rear Brake rod excessively chafed |3.2.A1a| | 1 |
| Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Upper Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
| Inner Front Upper Direction indicators not working |1.5.1c| | 1 |
| Centre Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Centre Rear Lower Drive chain worn to excess |6.2.1e| | 1 |
| Front Lower Footrest insecure |6.2.1a| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
| Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Brake hose excessively stretched (1.1.12 (b) (ii)) | 1 |
| Fuel cap ineffective no key to remove cap (6.1.3 (b) (i)) | 1 |
| Nearside Front Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
| Offside Front Suspension component modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
| Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Front Brake lever has insufficient reserve travel Spongey (1.1.2 (a)) | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Nearside Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Rear Suspension rod pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Position lamp adversely affected by the operation of another lamp headlamp dip beam not working correctly (4.2.3 (b)) | 1 |