>

MOT History from tests of petrol HONDA NS125s year 1991

Review the list of common HONDA NS125 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:51.22%
(The average a petrol HONDA NS125 year 1991 passes without issue)
Based on:328 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment24
Rear reflector on motorcycle missing |1.4.1|19
Rear wheel bearings have excessive free play |2.4.A.2c|14
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|13
Rear Rear reflector on motorcycle missing |1.4.1|12
Drive chain excessively loose |6.2.1d|12
Rear shock absorber has inadequate damping effect. |2.4.A.3b|11
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|10
Registration plate issues10
Nearside Front shock absorber seal failed and leaking oil |2.3.3|9
Steering headbearing has excessive free play |2.2.2|9
Offside Front shock absorber seal failed and leaking oil |2.3.3|8
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|8
Front Front shock absorber seal failed and leaking oil |2.3.3|7
Throttle operating incorrectly |6.2.1f|6
Front Roller brake test indicates a binding brake |3.3.A1a|6
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||6
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|6
Horn not working |1.7.3a|6
Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Rear suspension movement is excessively stiff |2.4.A.3b|5
Rear Drive chain sprocket worn to excess |6.2.1e|5
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|5
Front wheel bearings have excessive free play |2.3.5b|4
Front suspension has inadequate damping effect. |2.3.6c|4
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|4
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|4
Front wheel bearings are excessively rough |2.3.5b|4
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i||4
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Wheel alignment incorrect which adversely affects the handling |2.5.1|4
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|4
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|4
Offside Footrest insecure |6.2.1a|4
Direction indicators not working |1.5.1c|4
Headlamp aim beam image kick up to the offside |1.6|3
Rear Rear wheel bearings have excessive free play |2.4.A.2c|3
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Steering movement excessively `notchy` with the wheel raised |2.2.1b|3
Rear Drive chain excessively loose |6.2.1d|3
Front Brake disc|s| excessively worn |3.2.A1l|3
Front shock absorber seal failed and leaking oil |2.3.3|3
Drive chain excessively tight |6.2.1d|3
Front Wheel has an excessively distorted bead rim. |4.2.2|3
Front suspension assembly component missing |2.3.1|3
Drive chain worn to excess |6.2.1e|3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|3
Rear reflector on motorcycle obscured |1.4.1|3
Front Floor brake test indicates a binding brake |3.3.C2c|3
Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|3
Front Front suspension has inadequate damping effect. |2.3.6c|3
Brake pedal has inadequate reserve travel |3.1.3b|3
Rear suspension component seized |2.4A2a|ii||3
Nearside Direction indicator not working |1.5.1c|2
Brake lever cannot be applied smoothly |3.1.3d|2
Front Brake lever has inadequate reserve travel |3.1.3b|2
Nearside Front Direction indicators not working |1.5.1c|2
Offside Rear Direction indicator insecure |1.5.3b|2
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Direction indicators affected by the operation of another lamp |1.5.1c|2
Footrest insecure |6.2.1a|2
Rear Floor brake test indicates a binding brake |3.3.C2c|2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|2
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Footrest missing |6.2.1a|2
Rear suspension bush has excessive free play |2.4.A2a|i||2
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|2
Rear Drive chain sprocket carrier worn to excess |6.2.1e|2
Nearside Rear Footrest missing |6.2.1a|2
Fuel system component leaking |7.2.1a|2
Nearside Footrest insecure |6.2.1a|2
Rear Rear suspension bush has excessive free play |2.4.A2a|i||2
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|2
Rear Brake linkage clevis joint excessively worn |3.2.A1d|2
Offside Rear Footrest insecure |6.2.1a|2
Front Exhaust is leaking and excessively noisey |7.1.1b|2
Nearside Rear Direction indicator insecure |1.5.3b|2
Rear reflector missing |4.8.2 |a| |ii||2
Offside Front Direction indicator insecure |1.5.3b|2
Rear mono-shock pivot excessively worn |2.4.B.4|2
Rear Drive chain worn to excess |6.2.1e|2
Rear Roller brake test indicates a sticking brake |3.3.A1a|2
Front Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii||1
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i||1
Rear Brake pedal has insufficient reserve travel |1.1.2 |a||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Steering damper in such a condition that the steering action is impaired. excessive R/H lock -DAMAGE TO STEERING TOP. |2.1.2d|1
Rear suspension bearing has excessive free play Suspension linkage excessively worn |2.4.A2a|i||1
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b|1
Rear mono-shock pivot seized |2.4.B.4|1
Nearside Steering lock stop maladjusted |2.1.3|1
Rear Rear reflector on motorcycle obscured |1.4.1|1
Front Direction indicators not working |1.5.1c|1
Headlamp aim not tested |1.6|1
Nearside Direction indicator incorrect colour |1.5.1b|1
Offside Direction indicator incorrect colour |1.5.1b|1
Front Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Rear Rear suspension movement is excessively stiff |2.4.A.3b|1
Rear Rear mono-shock pivot seized |2.4.B.4|1
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c|1
Rear Drive chain excessively tight |6.2.1d|1
Front Steering movement excessively rough with the weight on the lower bearing |2.2.1a|1
Front Steering headbearing has excessive free play |2.2.2|1
Offside Rear Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a|1
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Offside Front Handlebar handgrip missing |2.1.1c|1
Nearside Front Front suspension assembly component cracked |2.3.1|1
Fuel system component insecure |7.2.1b|1
Nearside Position lamp switch insecure |1.1.4b|1
Nearside Rear Direction indicators not working |1.5.1c|1
Nearside Front Direction indicator insecure |1.5.3b|1
Front Brake disc|s| has excessive run out |3.2.A1m|1
Nearside Front Direction indicator not working |1.5.1c|1
Rear Brake pedal is so short and the brake cannot be readily applied |3.1.3c|1
Offside Brake rod excessively chafed |3.2.A1a|1
Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c|1
Offside Front Direction indicator affected by the operation of another lamp |1.5.1c|1
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c|1
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c|1
Front Headlamp switch faulty |1.2.4|1
Offside Front Direction indicator incorrect colour |1.5.1b|1
Front Direction indicator with a multiple light source more than 1/2 not functioning Changed head lamp bulb to stop interferance |4.4.1 |a| |ii||1
Front Brake disc|s| securing bolt|s| missing |3.2.A1g|1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Brake fluid reservoir severely damaged |3.2.B1b|1
Offside Front Front suspension assembly component loose |2.3.1|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Front Headlamp main beam affected by the operation of another lamp |1.2.2c|1
Rear Stop lamp affected by the operation of the horn |1.3.2|1
Front Horn control not functioning. |1.7.2b|1
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Lower Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Rear Fuel tank leaking |7.2.1a|1
Brake lever has inadequate reserve travel |3.1.3b|1
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Direction indicator not working |1.5.1c|1
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Front Headlamp aim not tested |1.6|1
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Headlamp main beam affected by the operation of another lamp |1.2.2c|1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Brake performance not tested |3.3|1
Offside Rear Footrest missing |6.2.1a|1
Upper Steering headbearing has excessive free play |2.2.2|1
Rear Gradient brake test indicates a sticking brake |3.3.D1c|1
Brake pedal is bent and the brake cannot be readily applied |3.1.3c|1
Clutch lever positioned so it cannot be readily operated. |6.2.1g|1
Front Fairings insecure and likely to impede the steering |2.1.2e|1
Nearside Steering lock stop ineffective |2.1.3|1
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c|1
Fairings insecure and likely to impede the steering |2.1.2e|1
Front Headlamp aim beam image kick up to the offside |1.6|1
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Front Brake lever attachment screws loose |3.1.2b|1
Offside Front Footrest insecure |6.2.1a|1
Nearside Front Footrest insecure |6.2.1a|1
Rear position lamp damaged and function impaired |1.1.1b|1
Front Headlamp aim headlamp damaged and function impaired |1.2.3a|1
Front Brake hose leaking fluid |3.2.B4|1
Handlebar handgrip not secure to handlebars. |2.1.1c|1
Brake lever cannot be released smoothly |3.1.3d|1
Floor brake test indicates a severely juddering brake |3.3C2d.|1
Offside Front Brake lever has inadequate reserve travel |3.1.3b|1
Headlamp switch faulty |1.2.4|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear Footrest insecure |6.2.1a|1
Front Direction indicators affected by the operation of another lamp |1.5.1c|1
Centre Rear Rear suspension movement is excessively stiff |2.4.A.3b|1
Centre Rear Rear reflector on motorcycle obscured |1.4.1|1
Rear Brake locking device missing |3.2.A1e|1
Rear Footrest missing |6.2.1a|1
Brake locking device insecure |3.2.A1e|1
Rear Rear wheel has a loose wheel nut|s| |4.2.3a|1
Direction indicator missing |1.5.1a|1
Chain guard insecure |6.2.1c|1
All position lamps do not illuminate immediately when switched on |1.1.3a|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Front Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c|1
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c|1
Rear Direction indicator insecure |1.5.3b|1
Front Horn is not a constant note |1.7.3c|1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Front mudguard insecure |2.3.7|1
Front Exhaust has a major leak of exhaust gases |6.1.2 |a||1
Front Fuel cap mounting flange/sealing method defective |7.2.2c|1
Front Front suspension has inadequate damping effect. front suspension has no damping |2.3.6c|1
Nearside Front Direction indicator incorrect colour nearside front indicator showing white not amber |1.5.1b|1
Nearside Front Handlebar handgrip not secure to handlebars. front left hand grip loose on bar |2.1.1c|1
Front wheel spindle securing nut|s| loose |2.3.3a|1
Headlamp aim headlamp damaged and function impaired |1.2.3a|1
Offside Front Direction indicator not working |1.5.1c|1
Offside Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Front Steering movement excessively stiff with the wheel raised |2.2.1b|1
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Front Front suspension assembly component excessively misaligned |2.3.1|1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Nearside Headlamp switch insecure |1.2.4|1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Clutch lever shortened so it cannot be readily operated. |6.2.1g|1
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Offside Direction indicator not working |1.5.1c|1
Brake pedal insecure |3.1.2a|1
Brake rod excessively damaged |3.2.A1c|1
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c|1
Headlamp main beam flickers when tapped lightly by hand |1.2.2c|1
Front Brake disc|s| excessively pitted |3.2.A1l|1
Front Brake lever cracked |3.1.2c|1
Brake lever attachment screws loose |3.1.2b|1
Exhaust is leaking and excessively noisey |7.1.1b|1
Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Nearside Front All position lamps adversely affected by the operation of another lamp |1.1.3b|1
Offside Front All position lamps adversely affected by the operation of another lamp |1.1.3b|1
Nearside Rear All position lamps adversely affected by the operation of another lamp |1.1.3b|1
Offside Rear All position lamps adversely affected by the operation of another lamp |1.1.3b|1
Front Headlamp deteriorated and function impaired |1.2.3a|1
Nearside Rear Chain guard missing |6.2.1c|1
Front Horn not working |7.7 |a| |ii||1
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii||1
Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a||1
Front Steering operation restricted in free movement from lock to lock |2.1.4 |c||1
Offside Front Footrest insecure |6.2.12 |a||1
Rear Rear reflector missing |4.8.2 |a| |ii||1
Rear Drive chain horseshoe locking device incorrectly fitted C,clip incorrectly fitted |6.1.7 |j| |i||1
Rear Position lamp not working |4.2.1 |a||1
Rear Stop lamp not working |4.3.1 |a| |ii||1
Stop lamp remains on when the brake is released |1.3.1e|1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d|1
Rear wheel bearings are excessively rough |2.4.A.2c|1
Rear wheel bearings are excessively tight |2.4.A.2c|1
Front Brake pipe union leaking fluid |3.2.B4|1
All position lamps adversely affected by the operation of another lamp |1.1.3b|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Front shock absorber seal failed and leaking oil both seals |2.3.3|1
Rear shock absorber insecurely mounted bolt not tight |2.4.A.3b|1
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Headlamp aim so that beam "kick up" is not visible on the screen kick up to the right |4.1.2 |a||1
Shock absorber has negligible damping effect |5.3.2 |b||1
Nearside Rear Footrest insecure |6.2.12 |a||1
Shock absorber has a serious fluid leak Both front forks pitted leaking fluid (5.3.2 (b))1
Brake disc contaminated Front disc and pads (1.1.14 (b))1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Rear Shock absorber has negligible damping effect (5.3.2 (b))1
Rear Wheel bearing has excessive play (5.1.3 (a) (i))1
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Stop lamp remains on when the brakes are released1
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy