| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 72 |
| Rear reflector on motorcycle missing |1.4.1| | 48 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 28 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 24 |
| Registration plate issues | 23 |
| Drive chain excessively loose |6.2.1d| | 22 |
| Steering headbearing has excessive free play |2.2.2| | 19 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 17 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 16 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 15 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 15 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 13 |
| Drive chain worn to excess |6.2.1e| | 13 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
| Front wheel bearings have excessive free play |2.3.5b| | 12 |
| Horn not working |1.7.3a| | 12 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 12 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 10 |
| Nearside Rear Footrest missing |6.2.1a| | 8 |
| Offside Rear Footrest missing |6.2.1a| | 8 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 8 |
| Throttle operating incorrectly |6.2.1f| | 8 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 7 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 7 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
| Front suspension has inadequate damping effect. |2.3.6c| | 7 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 7 |
| Front wheel bearings are excessively rough |2.3.5b| | 7 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 6 |
| Headlamp insecure |1.2.3b| | 6 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Headlamp aim beam image kick up to the offside |1.6| | 6 |
| Offside Front Footrest insecure |6.2.1a| | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Offside Front Direction indicator not working |1.5.1c| | 6 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 6 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 5 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
| Rear Drive chain excessively loose |6.2.1d| | 4 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Offside Footrest insecure |6.2.1a| | 4 |
| Fuel system component leaking |7.2.1a| | 4 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| An item not tested |Manual| | 4 |
| Direction indicator not working |1.5.1c| | 4 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 4 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 4 |
| Nearside Rear Direction indicator not working |1.5.1c| | 4 |
| Offside Steering lock stop ineffective |2.1.3| | 4 |
| Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 3 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 3 |
| Brake lever cannot be applied smoothly |3.1.3d| | 3 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Indicator switch insecure |1.5.4| | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Chain guard insecure |6.2.1c| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Rear Drive chain worn to excess |6.2.1e| | 3 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 3 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Front Steering headbearing has excessive free play |2.2.2| | 3 |
| Offside Rear Footrest insecure |6.2.1a| | 3 |
| Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 3 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 3 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 3 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Nearside Steering lock stop missing |2.1.3| | 2 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Nearside Direction indicator not working |1.5.1c| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Headlamp main beam affected by the operation of the horn |1.2.2c| | 2 |
| Front Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 2 |
| All position lamps adversely affected by the operation of the horn |1.1.3b| | 2 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 2 |
| Nearside Footrest insecure |6.2.1a| | 2 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 2 |
| Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Rear suspension component loose |2.4.A.1a| | 2 |
| Nearside Front Direction indicator missing |1.5.1a| | 2 |
| Offside Handlebar deformed |2.1.1b| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Nearside Front Footrest insecure |6.2.1a| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 2 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
| Nearside Rear Footrest insecure |6.2.1a| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Front Throttle operating incorrectly |6.2.1f| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Rear mono-shock insecure |2.4.B.4| | 2 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 2 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
| Nearside Steering lock stop ineffective |2.1.3| | 2 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 2 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Front Brake disc contaminated (1.1.14 (b)) | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
| Horn sound not in accordance with requirements (7.7 (c)) | 2 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
| Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
| Offside Steering lock stop missing |2.1.3| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Nearside Position lamp switch insecure |1.1.4b| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Inner Front Direction indicator not working |1.5.1c| | 1 |
| Inner Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Outer Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Rear suspension component loose |2.4.A.1a| | 1 |
| Offside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Brake rod excessively damaged |3.2.A1c| | 1 |
| Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Brake hose excessively deteriorated | 1 |
| Nearside Front Lower Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Centre Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Plate brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.B1c| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Brake pedal is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Headlamp switch insecure |1.2.4| | 1 |
| Nearside Handlebar handgrip missing |2.1.1c| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Brake master cylinder has an excessively worn master cylinder pivot. |3.2.B5| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Fuel system component leaking fuel tap leaking |7.2.1a| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Rear Brake lever excessively damaged |3.2.A1c| | 1 |
| Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Offside Front Steering lock stop maladjusted |2.1.3| | 1 |
| Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Offside Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Brake pedal mounting insecure |3.1.2a| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front position lamp does not face the front |1.1.1d| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Nearside Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Rear Brake pedal attachment screws loose |3.1.2b| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Front Brake locking device missing |3.2.A1e| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Lower Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Upper Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Nearside Front Front suspension assembly component missing |2.3.1| | 1 |
| Offside Front Front suspension assembly component missing |2.3.1| | 1 |
| Rear Brake component has an inadequate repair |3.1.5| | 1 |
| Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Rear Drive chain fouling another component |6.2.1d| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Front All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Throttle operating incorrectly throttle sticking open |6.2.1f| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Upper Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Lower Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii|| | 1 |
| Offside Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake cylinder leaking hydraulic fluid possible fluid leak at brake caliper |3.2.B1e| | 1 |
| Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Rear Direction indicator obscured |1.5.1a| | 1 |
| Headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Front Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Front Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Rear suspension component seized |2.4A2a|ii|| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Front wheel bearings are excessively tight |2.3.5b| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Lower Rear suspension component loose |2.4.A.1a| | 1 |
| Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Nearside Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Motorcycle structure cracked |6.1.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Nearside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Offside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Offside Direction indicator incorrect colour |1.5.1b| | 1 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Brake lever attachment screws loose |3.1.2b| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Centre Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Nearside Steering lock stop maladjusted |2.1.3| | 1 |
| Offside Steering lock stop maladjusted |2.1.3| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Front Brake lever is inoperative |3.1.3c| | 1 |
| Nearside Drive chain excessively loose |6.2.1d| | 1 |
| Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Offside Front Lower Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Offside Front Upper Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Centre Rear Lower Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Centre Front Upper Motorcycle structure adversely modified |6.1.1b| | 1 |
| Nearside Front Upper Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
| Front Brake hose damaged and likely to fail |1.1.12 |a|| | 1 |
| Rear Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
| Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Offside Rear Brake pedal attachment screws loose |3.1.2b| | 1 |
| Rear Rear position lamp insecure |1.1.1c| | 1 |
| Nearside Rear Rear suspension has severe distortion of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Rear mono-shock pivot seized |2.4.B.4| | 1 |
| Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Front Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Chain guard insecure |6.2.1c| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Position lamp switch insecure |1.1.4b| | 1 |
| Central Rear Suspension rod pin or bush excessively worn lower suspension link center bush excessively worn |5.3.4 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Shock absorber has a serious fluid leak both front forks |5.3.2 |b|| | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Brake lever so insecure that the brake cannot be readily applied brake control notchy in operation |1.1.2 |e| |ii|| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Suspension component has excessive wear or free play swinging arm (5.3.3 (d)) | 1 |
| Rear Shock absorber likely to become detached lower securing nut missing (5.3.2 (a) (ii)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Stop lamp adversely affected by the operation of another lamp by indicators (4.3.3 (b)) | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Fuel system component leaking carb leaks if fuel left on. (6.1.3 (b) (i)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
| Nearside Front Footrest insecure pivot excess wear (6.2.12 (a)) | 1 |
| Exhaust silencer insecure securing nut missing (8.1.1 (b) (i)) | 1 |
| Offside Rear Lower Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Nearside Rear Upper Footrest missing (6.2.12 (a)) | 1 |
| Central Front Lower Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Rear Suspension component has an unsafe modification swing arm bottoming out on exhaust (5.3.3 (c) (i)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Wheel bearing has excessive play both (5.1.3 (a) (i)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Central Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Stop lamp not working rear brake (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Offside Front Footrest insecure (6.2.12 (a)) | 1 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Rear Brake component insecure Torsion arm to swing arm (1.1.21 (c)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Front Suspension component pin or bush excessively worn front upper head stock bearings worn (5.3.4 (a) (i)) | 1 |
| Front Position lamp not working front side light out (4.2.1 (a)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Steering operation impeded by a fairing cable routing (2.1.4 (e)) | 1 |