Most common failures | No# failures |
---|
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Headlamp aim out of alignment | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Registration plate issues | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Wheel spoke excessively bent |4.2.1b| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Steering headbearing excessively stiff or notchy Notching in several positions (2.2.2 (f) (i)) | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Steering damper insecure |2.1.2d| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Offside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Horn not working Exhaust blowing to bad to be able to tell if horn working or not |1.7.3a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |