| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 10 |
| Registration plate issues | 8 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Horn not working |1.7.3a| | 4 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Offside Rear Footrest missing |6.2.1a| | 2 |
| Brake locking device missing |3.2.A1e| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Direction indicators not working |1.5.1c| | 2 |
| Front Direction indicators not working |1.5.1c| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Front Brake lever cracked |3.1.2c| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Horn emits 2 or more alternating tones |1.7.3b| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Offside Rear Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Offside Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Fork yoke insecure (2.2.2 (d) (i)) | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Front position lamp missing |1.1.1a| | 1 |
| Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Central Front Position lamp not working (4.2.1 (a)) | 1 |
| Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Nearside Front Lower Brake rod has restricted free movement BRAKE ROD ARM STICKING (1.1.15 (e)) | 1 |
| Front Brake lever so insecure that the brake cannot be readily applied |1.1.2 |e| |ii|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Fuel system component leaking |6.1.3 |b| |i|| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| All position lamps not working all (4.2.1 (a)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |