Most common failures | No# failures |
---|
Headlamp aim out of alignment | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Registration plate issues | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Horn is not a constant note |1.7.3c| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake lever pivot excessively tight (1.1.1 (a)) | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake lever pivot excessively tight (1.1.1 (a)) | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front position lamp damaged and function impaired |1.1.1b| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp at least one does not illuminate on dipped beam unable to start bike to test lights |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam unable to start bike to test lights |1.2.2a|ii|| | 1 |
Rear position lamp does not illuminate immediately when it is switched on unable to start bike to test lights |1.1.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Offside Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |