Most common failures | No# failures |
---|
Headlamp aim out of alignment | 20 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 14 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 12 |
Exhaust is leaking and excessively noisey |7.1.1b| | 10 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Horn not working |1.7.3a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Registration plate issues | 3 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 3 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Horn not working |1.7.3a| | 3 |
Rear Brake cable excessively corroded |3.2.A1b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Front Direction indicators not working |1.5.1c| | 2 |
Rear Direction indicators not working |1.5.1c| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake back plate|s| insecure |3.2.A1j| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Nearside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Front Brake cable badly frayed |3.2.A1b| | 1 |
Rear Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Front Brake cable excessively corroded |3.2.A1b| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working Rear brake switch (4.3.1 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Roller brake test No brake control achieves an efficiency of 30% |1.2.2 |a| |i|| | 1 |
Front Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Suspension component modified so the suspension is inoperative |5.3.3 |c| |ii|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Brake performance not tested |3.3| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Brake cable has restricted free movement |1.1.15 |e|| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Centre Rear Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Rear Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Upper Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Brake component has an inadequate repair |3.1.5| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Brake lever attachment screws loose |3.1.2b| | 1 |
Rear Valve stem seriously misaligned (5.2.3 (j)) | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Horn not working (1.7.3a) | 1 |
Direction indicators flashing less than 60 times a minute (1.5.1c) | 1 |
Direction indicators affected by the operation of another lamp (1.5.1c) | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |