Most common failures | No# failures |
---|
Headlamp aim out of alignment | 30 |
Registration plate lamp issues | 9 |
Registration plate issues | 8 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Stop lamp remains on when the brakes are released | 5 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 4 |
Front Brake excessively binding (1.2.1 (f)) | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Drive chain excessively loose |6.2.1d| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Headlamp insecure |4.1.1 |c|| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
Speedometer cannot be illuminated (7.8 (c) (ii)) | 2 |
Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 2 |
Nearside Front Service brake excessively binding (1.2.1 (f)) | 2 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Rear fog lamp switch missing |1.3.1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Front Upper Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Upper Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Footrest insecure bolt missing |6.2.1a| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain link fitted wrong way round |6.2.1h| | 1 |
Steering control fouling between components which interferes with the free movement of the steering Steering lock fouling frame |2.1.2a| | 1 |
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Locking nut missing |6.2.1h| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Front Position lamp not working |4.2.1 |a|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp damaged and function impaired |1.2.3a| | 1 |
Front Stop lamp not working Front brake light switch inoperative. |4.3.1 |a| |ii|| | 1 |
Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Side repeater missing |1.4.A.2b| | 1 |
Rear fog lamp missing |1.3.2a| | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Nearside Front Lower Direction indicators not working |1.5.1c| | 1 |
Nearside Front Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking rear swing arm nut loose |6.1.1c| | 1 |
Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Parking brake efficiency below requirements |3.7.C.1b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Indicator tell tale not functioning |1.5.2| | 1 |
Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Front Brake caliper insecurely mounted and braking performance affected caliper bolt missing (1.1.16 (c) (ii)) | 1 |
Front Brake caliper inadequately mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
Front Brake disc significantly and obviously worn front disc damaged/bent (1.1.14 (a) (i)) | 1 |
Front Brake performance not tested front caliper insecure (1.2.1 (g)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Brake lagging in operation (1.2.1 (d)) | 1 |
Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Shock absorber insecurely attached top fork bolt missing (5.3.2 (a) (i)) | 1 |
Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Offside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Front All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Offside Rear All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock lock stops ineffective both locks. (2.1.4 (b)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Stop lamp not working front lever (4.3.1 (a) (ii)) | 1 |
Stop lamp not working Does not illuminate by the operation front brake controls (4.3.1 (a) (ii)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b)) | 1 |
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
Nearside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
Headlamp levelling device inoperative offside headlamp inoperative (4.1.5 (a)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
Offside Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b)) | 1 |
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Headlamp aim projected beam image obviously incorrect incorectly fitted bulb (4.1.2 (c)) | 1 |
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Position lamp not working Both (4.2.1 (a)) | 1 |
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Shock absorber has negligible damping effect Both (5.3.2 (b)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Offside Front Brake lever has restricted free movement (1.1.15 (e)) | 1 |
Rear Suspension rod mounting modified so the suspension is inoperative not returning (5.3.3 (c) (ii)) | 1 |
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |