Most common failures | No# failures |
---|
Headlamp aim out of alignment | 42 |
Registration plate issues | 31 |
Registration plate lamp issues | 30 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 19 |
Windscreen wiper does not clear the windscreen effectively | 15 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 8 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Horn not working |1.7.3a| | 7 |
Drive chain excessively loose |6.2.1d| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Stop lamp remains on when the brakes are released | 4 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front Brake excessively binding (1.2.1 (f)) | 4 |
Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 3 |
Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 3 |
Nearside Side repeater missing |1.4.A.2b| | 3 |
Offside Side repeater missing |1.4.A.2b| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Stop lamp not working |1.2.1b| | 3 |
Horn missing |1.7.1| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Rear fog lamp missing |1.3.2a| | 2 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
Offside Rear fog lamp missing |1.3.2a| | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Rear brake binding | 2 |
Service brake: efficiency below requirements |3.7.C.1a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front shock absorber leaking oil |9.2.7b| | 2 |
Horn not working |1.6.2a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Rear fog lamp not working |1.3.2b| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 2 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |