Most common failures | No# failures |
---|
Headlamp aim out of alignment | 70 |
Registration plate issues | 58 |
Rear reflector on motorcycle missing |1.4.1| | 31 |
Registration plate lamp issues | 23 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Drive chain excessively loose |6.2.1d| | 15 |
Windscreen wiper does not clear the windscreen effectively | 14 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 12 |
Steering headbearing has excessive free play |2.2.2| | 10 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Horn not working |1.7.3a| | 8 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Offside Rear fog lamp not working |1.3.2b| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Centre Stop lamp not working |1.2.1b| | 4 |
Offside Rear fog lamp emits a light other than red |1.3.2e| | 4 |
Parking brake: efficiency below requirements |3.7.C.1b| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear brake binding | 4 |
Nearside Obligatory mirror missing |8.1.1| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Offside Front position lamp|s| not working |1.1.A.3b| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 4 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Rear parking brake recording little or no effort | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Offside Front Direction indicator insecure |1.5.3b| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Front Riders seat insecure |6.2.1a| | 3 |
Drive chain excessively loose |6.1.7 |c| |i|| | 3 |
Brakes imbalanced across an axle | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
Rear Brake excessively binding (1.2.1 (f)) | 3 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Rear fog lamp emits a light other than red |1.3.2e| | 2 |
Nearside Side repeater not working |1.4.A.2c| | 2 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 2 |
Rear Parking brake efficiency below requirements |3.7.C.1b| | 2 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 2 |
Drive chain excessively tight |6.1.7 |k| |i|| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Brake performance not tested |3.3| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Horn not working |1.6.2a| | 2 |
Nearside front brake binding |3.7.B.1| | 2 |
Rear Stop lamp not working |1.2.1b| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Rear Rear fog lamp missing |1.3.2a| | 2 |
Nearside Side repeater missing |1.4.A.2b| | 2 |
Offside Side repeater missing |1.4.A.2b| | 2 |
Front Front position lamp missing |1.1.1a| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Nearside Rear Footrest insecure |6.2.1a| | 2 |
Fuel pipe leaking |7.2.1a| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Rear wheel bearing has excessive play |2.6.2| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Offside Rear fog lamp missing |1.3.2a| | 2 |
Rear fog lamp tell tale not working |1.3.1b| | 2 |
Rear fog lamp switch missing |1.3.1a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 2 |
Offside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 2 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 2 |
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Headlamp aim not tested |1.6| | 2 |
Offside Rear fog lamp insecure |1.3.2a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 2 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Offside Rear Anti-roll bar has excessive play in a ball joint |2.4.G.2| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Offside Handlebar deformed |2.1.1b| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Nearside Rear Direction indicators not working |1.4.A.2c| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Horn not working (7.7 (a)) | 2 |