Most common failures | No# failures |
---|
Headlamp aim out of alignment | 93 |
Registration plate issues | 89 |
Rear reflector on motorcycle missing |1.4.1| | 38 |
Registration plate lamp issues | 36 |
Windscreen wiper does not clear the windscreen effectively | 32 |
Horn not working |1.7.3a| | 21 |
Drive chain excessively loose |6.2.1d| | 19 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 16 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Rear reflector missing (4.8.2 (a) (ii)) | 16 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 15 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 13 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Front wheel bearings have excessive free play |2.3.5b| | 13 |
Horn missing |1.7.1| | 13 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Brake pipe excessively corroded | 11 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
Offside Front position lamp|s| not working |1.1.A.3b| | 10 |
Drive chain worn to excess |6.2.1e| | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 9 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Headlamp aim beam image kick up to the offside |1.6| | 9 |
Nearside Stop lamp not working |1.2.1b| | 9 |
Steering headbearing has excessive free play |2.2.2| | 9 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 8 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 8 |
Rear Rear reflector on motorcycle missing |1.4.1| | 8 |
Drive chain excessively tight |6.2.1d| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 7 |
Offside Rear fog lamp missing |1.3.2a| | 6 |
Anti-lock braking system warning lamp indicates an ABS fault | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 6 |
Nearside Rear Stop lamp not working |1.2.1b| | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 6 |
Offside Rear Stop lamp not working |1.2.1b| | 6 |
Offside Stop lamp not working |1.2.1b| | 6 |
Front Steering headbearing has excessive free play |2.2.2| | 5 |
Rear fog lamp switch missing |1.3.1a| | 5 |
Offside Headlamp not working on dipped beam |1.7.5a| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Parking brake: efficiency below requirements |3.7.B.7| | 5 |
Offside Front Anti-roll bar linkage insecure |2.4.G.1| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Offside Rear fog lamp not working |1.3.2b| | 4 |
Nearside Side repeater missing |1.4.A.2b| | 4 |
Offside Side repeater missing |1.4.A.2b| | 4 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 4 |
Nearside Front position lamp|s| incorrect colour |1.1.A.3e| | 4 |
Offside Front position lamp|s| incorrect colour |1.1.A.3e| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front position lamp|s| not working |1.1.A.3b| | 4 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Handlebar deformed |2.1.1b| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 3 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 3 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Nearside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 3 |
Offside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 3 |
Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Rear fog lamp not working |1.3.2b| | 3 |
Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 3 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
Front Wheel spoke excessively loose |4.2.1b| | 3 |
Parking brake: efficiency below requirements |3.7.C.1b| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Front Headlamp aim beam image kick up to the offside |1.8| | 3 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Offside Front Anti-roll bar linkage fractured |2.4.G.1| | 3 |
Brakes imbalanced across an axle | 3 |
Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 3 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 3 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 3 |
Front Position lamp not working (4.2.1 (a)) | 3 |