>

MOT History from tests of petrol HONDA HONDAs year 2003

Review the list of common HONDA HONDA failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:79.94%
(The average a petrol HONDA HONDA year 2003 passes without issue)
Based on:3,939 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment118
Registration plate issues83
Windscreen wiper does not clear the windscreen effectively51
Registration plate lamp issues39
Rear reflector on motorcycle missing |1.4.1|38
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|26
Horn not working |1.7.3a|25
Drive chain excessively loose |6.2.1d|21
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|19
Rear Rear reflector on motorcycle missing |1.4.1|14
Headlamp aim beam image kick up to the offside |1.6|14
Stop lamp does not illuminate immediately a brake applies |1.3.1a|14
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||13
Steering headbearing has excessive free play |2.2.2|13
Steering movement excessively `notchy` with the wheel raised |2.2.1b|13
Nearside Front shock absorber seal failed and leaking oil |2.3.3|12
Brake pipe excessively corroded12
Nearside Front position lamp|s| not working |1.1.A.3b|11
Offside Stop lamp not working |1.2.1b|11
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|11
Front wheel bearings have excessive free play |2.3.5b|11
Front Roller brake test indicates a binding brake |3.3.A1a|11
Nearside Rear Stop lamp not working |1.2.1b|10
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|10
Front position lamp does not illuminate immediately when switched on |1.1.3a|10
Rear Roller brake test indicates a binding brake |3.3.A1a|10
Offside Front position lamp|s| not working |1.1.A.3b|9
Nearside Front Front position lamp|s| not working |1.1.A.3b|9
Wheel alignment incorrect which adversely affects the handling |2.5.1|9
Anti-lock braking system warning lamp indicates an ABS fault9
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||8
Rear wheel bearings have excessive free play |2.4.A.2c|7
Front Roller brake test indicates a sticking brake |3.3.A1a|7
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|7
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|7
Drive chain worn to excess |6.2.1e|7
Offside Front shock absorber seal failed and leaking oil |2.3.3|6
Exhaust is leaking and excessively noisey |7.1.1b|6
Front Wheel spoke excessively loose |4.2.1b|6
Rear Wheel spoke excessively loose |4.2.1b|6
Horn missing |1.7.1|6
Nearside Stop lamp not working |1.2.1b|6
Drive chain excessively tight |6.2.1d|6
Throttle operating incorrectly |6.2.1f|6
Offside Rear fog lamp missing |1.3.2a|5
Rear fog lamp switch missing |1.3.1a|5
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|5
Front Brake disc|s| excessively worn |3.2.A1l|5
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|5
Rear Brake lever has inadequate reserve travel |3.1.3b|5
Rear fog lamp not working |1.3.2b|5
Offside Front Direction indicator not working |1.5.1c|5
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|5
Direction indicators not working |1.5.1c|5
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|5
Rear Rear wheel bearings have excessive free play |2.4.A.2c|5
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|5
Headlamp aim beam image kick up to the offside |1.8|4
Front shock absorber seal failed and leaking oil |2.3.3|4
Offside Front Anti-roll bar linkage insecure |2.4.G.1|4
Offside Rear Stop lamp not working |1.2.1b|4
Nearside Front Direction indicator not working |1.5.1c|4
Offside Front wheel bearing has excessive play |2.5.A.3c|4
Stop lamp remains on when the brake is released |1.3.1e|4
Rear suspension bush has excessive free play |2.4.A2a|i||4
Rear Floor brake test indicates a binding brake |3.3.C2c|4
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|4
Offside Front Direction indicator insecure |1.5.3b|4
Front Front wheel bearings have excessive free play |2.3.5b|4
Handlebar deformed |2.1.1b|4
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))4
Front Wheel bearing rough when rotated (5.1.3 (b) (i))4
Front Brake excessively binding (1.2.1 (f))4
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))4
Nearside Front Headlamp aim beam image kick up to the offside |1.8|3
Offside Front Headlamp aim beam image kick up to the offside |1.8|3
Rear fog lamp tell tale missing |1.3.1b|3
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3|3
Nearside Rear Shock absorber has a serious fluid leak |2.7.3|3
Headlamp excessively damaged so that the light output is severely reduced |1.7.5a|3
Horn control missing |1.6.1|3
Windscreen has damage3
Rear shock absorber has inadequate damping effect. |2.4.A.3b|3
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|3
Parking brake: efficiency below requirements |3.7.B.7|3
Horn not working |1.6.2a|3
Headlamp insecure |1.2.3b|3
Nearside Rear coil spring broken |2.4.C.1a|3
Nearside Front Anti-roll bar linkage insecure |2.4.G.1|3
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Riders seat insecure |6.2.1a|3
Front Headlamp aim beam image kick-up is to the offside |1.6.1|3
Wheel alignment incorrect which adversely affects the steering |2.5.1|3
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|3
Rear Brake disc|s| excessively worn |3.2.A1l|3
Front Brake lever has inadequate reserve travel |3.1.3b|3
Rear Drive chain sprocket worn to excess |6.2.1e|3
Offside Front Front position lamp|s| not working |1.1.A.3b|3
Front Brake lever cannot be applied smoothly |3.1.3d|3
Front Wheel alignment incorrect which adversely affects the handling |2.5.1|3
Nearside Front Direction indicator incorrect colour |1.5.1b|3
Horn not working |7.7 |a| |ii||3
Battery insecure |1.9.1|3
Nearside Rear Footrest missing |6.2.1a|3
Offside Rear Footrest missing |6.2.1a|3
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|3
Front position lamp|s| not working |1.1.A.3b|3
Nearside Front Position lamp not working (4.2.1 (a) (ii))3
Horn not working (7.7 (a) (ii))3
Stop lamp remains on when the brakes are released3

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy