Most common failures | No# failures |
---|
Headlamp aim out of alignment | 288 |
Registration plate issues | 156 |
Registration plate lamp issues | 143 |
Windscreen wiper does not clear the windscreen effectively | 104 |
Parking brake: efficiency below requirements |3.7.B.7| | 85 |
Headlamp aim beam image kick up to the offside |1.6| | 85 |
Brake pipe excessively corroded | 79 |
Rear reflector on motorcycle missing |1.4.1| | 76 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 73 |
Offside Front position lamp|s| not working |1.1.A.3b| | 50 |
Nearside Stop lamp not working |1.2.1b| | 48 |
Rear parking brake recording little or no effort | 46 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 45 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 43 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 42 |
Brakes imbalanced across an axle | 42 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 41 |
Drive chain excessively loose |6.2.1d| | 40 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 37 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 36 |
Offside Rear fog lamp not working |1.3.2b| | 35 |
Offside Stop lamp not working |1.2.1b| | 35 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 35 |
Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 32 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 32 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 32 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 28 |
Throttle operating incorrectly |6.2.1f| | 28 |
Front wheel bearings have excessive free play |2.3.5b| | 28 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 28 |
Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 27 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 27 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 27 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 26 |
Anti-lock braking system warning lamp indicates an ABS fault | 26 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 25 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 24 |
Nearside Rear Stop lamp not working |1.2.1b| | 24 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 24 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 23 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 21 |
Parking brake lever has no reserve travel |3.1.6b| | 21 |
Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 19 |
Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 19 |
Horn not working |1.7.3a| | 19 |
Service brake: efficiency below requirements |3.7.B.7| | 18 |
Rear Rear reflector on motorcycle missing |1.4.1| | 18 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 18 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 17 |
Steering headbearing has excessive free play |2.2.2| | 17 |
Front shock absorber seal failed and leaking oil |2.3.3| | 17 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 16 |
Front Front wheel bearings have excessive free play |2.3.5b| | 16 |
Exhaust has a major leak of exhaust gases |7.1.2| | 16 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 16 |
Centre Stop lamp not working |1.2.1b| | 16 |
Front Headlamp aim beam image kick up to the offside |1.6| | 15 |
Emissions not tested |7.0| | 15 |
Offside Rear Stop lamp not working |1.2.1b| | 14 |
Drive chain worn to excess |6.2.1e| | 14 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 13 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 13 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 13 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 13 |
Rear reflector missing (4.8.2 (a) (ii)) | 13 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 12 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 12 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 12 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 12 |
Nearside Steering rack gaiter split |2.2.D.2d| | 11 |
Front wheel bearings are excessively rough |2.3.5b| | 11 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 11 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 11 |
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 10 |
Rear fog lamp tell tale not working |1.3.1b| | 10 |
Exhaust is leaking and excessively noisey |7.1.1b| | 10 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 10 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 10 |
Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 9 |
Offside Steering rack gaiter split |2.2.D.2d| | 9 |
Nearside Front Direction indicator not working |1.5.1c| | 9 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 9 |
Offside Headlamp not working on dipped beam |1.7.5a| | 9 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 9 |
Offside Rear fog lamp missing |1.3.2a| | 8 |
Rear brake binding | 8 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 8 |
Nearside Rear Direction indicator not working |1.5.1c| | 8 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 8 |
Rear Brake disc|s| cracked |3.2.A1g| | 8 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 8 |
Riders seat insecure |6.2.1a| | 8 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 8 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 8 |
Nearside Rear Direction indicators not working |1.5.1c| | 8 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 8 |
Rear fog lamp not working |1.3.2b| | 7 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 7 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 7 |
Rear brake disc in such a condition that it is seriously weakened | 7 |
Rear Rear fog lamp not working |1.3.2b| | 7 |
Offside Front Footrest insecure |6.2.1a| | 7 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 7 |
Front Brake excessively binding (1.2.1 (f)) | 7 |