>

MOT History from tests of petrol HONDA HONDAs year 1991

Review the list of common HONDA HONDA failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:73.52%
(The average a petrol HONDA HONDA year 1991 passes without issue)
Based on:4,622 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment215
Registration plate issues92
Rear reflector on motorcycle missing |1.4.1|85
Parking brake: efficiency below requirements |3.7.B.7|67
Windscreen wiper does not clear the windscreen effectively51
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|50
Front Roller brake test indicates a binding brake |3.3.A1a|49
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|41
Stop lamp does not illuminate immediately a brake applies |1.3.1a|37
Rear wheel bearings have excessive free play |2.4.A.2c|36
Offside Rear fog lamp not working |1.3.2b|34
Offside Front shock absorber seal failed and leaking oil |2.3.3|30
Rear parking brake recording little or no effort30
Front wheel bearings have excessive free play |2.3.5b|29
Horn not working |1.7.3a|29
Steering headbearing has excessive free play |2.2.2|28
Rear Rear reflector on motorcycle missing |1.4.1|28
Offside Front constant velocity joint gaiter split |2.5.C.1a|24
Rear Roller brake test indicates a binding brake |3.3.A1a|24
Front wheel bearings are excessively rough |2.3.5b|24
Nearside Front shock absorber seal failed and leaking oil |2.3.3|21
Front position lamp does not illuminate immediately when switched on |1.1.3a|20
Throttle operating incorrectly |6.2.1f|20
Drive chain excessively loose |6.2.1d|19
Exhaust is leaking and excessively noisey |7.1.1b|19
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|18
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||18
Nearside Steering rack gaiter split |2.2.D.2d|18
Nearside Front constant velocity joint gaiter split |2.5.C.1a|17
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|17
Brakes imbalanced across an axle16
Nearside Front position lamp|s| not working |1.1.A.3b|16
Front Exhaust has a major leak of exhaust gases |7.1.2|16
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|15
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|15
Exhaust has a major leak of exhaust gases |7.1.2|14
Exhaust emissions carbon monoxide content excessive |7.3.B.1a|14
Offside Front position lamp|s| not working |1.1.A.3b|14
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|14
Horn not working |1.6.2a|14
Offside Front coil spring fractured |2.4.C.1a|13
Drive chain excessively tight |6.2.1d|13
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a|13
Riders seat insecure |6.2.1a|13
Rear fog lamp tell tale not working |1.3.1b|12
Offside Rear fog lamp missing |1.3.2a|12
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|12
Headlamp aim beam image kick up to the offside |1.6|12
Service brake: efficiency below requirements |3.7.B.7|12
Rear Rear fog lamp not working |1.3.2b|12
Registration plate lamp issues11
Front Floor brake test indicates a binding brake |3.3.C2c|11
Rear Brake disc|s| cracked |3.2.A1g|11
Steering movement excessively `notchy` with the wheel raised |2.2.1b|11
Nearside Front Steering rack gaiter split |2.2.D.2d|10
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|10
Rear Brake disc|s| excessively worn |3.2.A1l|10
Offside Headlamp not working on dipped beam |1.7.5a|10
Brake pipe excessively corroded9
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|9
Offside Front Front constant velocity joint gaiter split |2.5.C.1a|9
Rear Exhaust has a major leak of exhaust gases |7.1.2|9
Offside Front Front position lamp|s| not working |1.1.A.3b|8
Rear brake binding8
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|8
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||8
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|8
Nearside Headlamp not working on dipped beam |1.7.5a|8
Drive chain worn to excess |6.2.1e|8
Parking brake lever has no reserve travel |3.1.6b|8
Offside Rear Rear fog lamp not working |1.3.2b|8
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a|7
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|7
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|7
Front shock absorber seal failed and leaking oil |2.3.3|7
Rear Rear wheel bearings have excessive free play |2.4.A.2c|7
Nearside Rear Footrest missing |6.2.1a|7
Offside Front Footrest insecure |6.2.1a|7
Centre Exhaust has a major leak of exhaust gases |7.1.2|7
Rear Drive chain sprocket worn to excess |6.2.1e|7
Rear shock absorber has inadequate damping effect. |2.4.A.3b|7
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a|7
Offside Steering rack gaiter split |2.2.D.2d|7
Front brake disc in such a condition that it is seriously weakened6
Nearside Front Direction indicator not working |1.5.1c|6
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|6
Nearside Front coil spring fractured |2.4.C.1a|6
Offside Rear Footrest missing |6.2.1a|6
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|6
Front Front wheel bearings have excessive free play |2.3.5b|6
Rear Roller brake test indicates a sticking brake |3.3.A1a|6
Exhaust markings indicating not for road use or similar wording |7.1.4|6
Rear Rear fog lamp missing |1.3.2a|6
Wheel alignment incorrect which adversely affects the handling |2.5.1|6
Emissions not tested |7.0|6
Nearside Stop lamp not working |1.2.1b|6
Rear fog lamp switch missing |1.3.1a|6
Nearside Rear Stop lamp not working |1.2.1b|6
Nearside Front Front position lamp|s| not working |1.1.A.3b|5
Offside front brake binding |3.7.B.1|5
Stop lamp remains on when the brake is released |1.3.1e|5
Fuel system component insecure |7.2.1b|5
Front Front wheel bearings are excessively rough |2.3.5b|5
Front Front shock absorber seal failed and leaking oil |2.3.3|5
Front Exhaust is leaking and excessively noisey |7.1.1b|5
Rear Drive chain excessively loose |6.2.1d|5
Drive chain sprocket carrier worn to excess |6.2.1e|5
Front Brake lever cannot be applied smoothly |3.1.3d|5
Front Wheel has an excessively distorted bead rim. |4.2.2|5
Rear Stop lamp remains on when the brake is released |1.3.1e|5
Front Brake disc|s| excessively worn |3.2.A1l|5
Parking brake: efficiency below requirements |3.7.C.1b|5
Nearside rear brake recording little or no effort |3.7.B.5a|5
Front Brake disc|s| is excessively distorted |3.2.A1m|5
Offside Rear Direction indicator not working |1.5.1c|5
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|5
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a|5
Offside Headlamp not working on main beam |1.7.5a|5
Rear Stop lamp not working (4.3.1 (a) (ii))5
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|4
Front Direction indicators not working |1.5.1c|4
Direction indicators not working |1.5.1c|4
Offside Front Direction indicator not working |1.5.1c|4
Exhaust mounting does not fully support the exhaust system |7.1.1.c|4
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|4
Horn not loud enough to be heard by another road user |1.7.3a|4
Nearside Headlamp not working on main beam |1.7.5a|4
Nearside Front Direction indicators not working |1.5.1c|4
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|4
Rear Brake disc|s| excessively scored |3.2.A1l|4
Exhaust emissions hydrocarbon content excessive |7.3.B.1b|4
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c|4
Nearside Rear Direction indicator missing |1.5.1a|4
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|4
Front Floor brake test indicates a sticking brake |3.3.C2c|4
Nearside Front Shock absorber has a serious fluid leak |2.7.3|4
Fairings insecure and likely to impede the steering |2.1.2e|4
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||4
Steering movement excessively stiff with the wheel raised |2.2.1b|4
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|4
Front Riders seat insecure |6.2.1a|4
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|4
Rear reflector missing |4.8.2 |a| |ii||4
Front Plate brake test indicates a binding brake |3.3.B1a|4
Offside Front Direction indicator not working |1.4.A.2c|4
Brake hose excessively deteriorated4
Nearside Rear Footrest insecure |6.2.1a|4
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4|4
Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2|4
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|4
Offside Windscreen wiper blade deteriorated |8.2.2|4
Rear fog lamp missing |1.3.2a|4
Offside Rear Stop lamp not working |1.2.1b|4
Offside Rear rear brake recording little or no effort |3.7.B.5a|4
Rear brake disc in such a condition that it is seriously weakened4
Rear brake disc excessively pitted |3.5.1h|4
Nearside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2|4
Windscreen wiper blade insecure4
Nearside Rear brake disc excessively pitted |3.5.1h|4
Offside Rear brake disc excessively pitted |3.5.1h|4
Nearside Front Direction indicator insecure |1.4.A.2b|4
Front Brake excessively binding (1.2.1 (f))4
Front Stop lamp not working (4.3.1 (a) (ii))4

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy