Most common failures | No# failures |
---|
Headlamp aim out of alignment | 68 |
Registration plate issues | 31 |
Rear reflector on motorcycle missing |1.4.1| | 17 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 16 |
Horn not working |1.7.3a| | 15 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 15 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 14 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 13 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 12 |
Headlamp aim beam image kick up to the offside |1.6| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 8 |
Drive chain excessively loose |6.2.1d| | 7 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 7 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front suspension has inadequate damping effect. |2.3.6c| | 6 |
Throttle operating incorrectly |6.2.1f| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Horn not loud enough to be heard by another road user |1.7.3a| | 5 |
Registration plate lamp issues | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Rear Brake locking device missing |3.2.A1e| | 4 |
Front position lamp incorrect colour |1.1.2a| | 4 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 4 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 3 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 3 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Brakes imbalanced across an axle | 3 |
Horn not working |1.6.2a| | 3 |
Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 3 |
Offside Footrest insecure |6.2.1a| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Nearside Footrest insecure |6.2.1a| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Rear Stop lamp not working |1.2.1b| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear brake binding | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Headlamp aim not tested |1.6| | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 2 |
Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Brake pipe inadequately clipped |3.6.B.1| | 2 |
Front front brake binding |3.7.B.1| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Hazard warning switch faulty |1.4.B.1d| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Brake locking device missing |3.2.A1e| | 2 |
Nearside Lower Motorcycle structure excessively corroded |6.1.1a| | 2 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Centre Stop lamp not working |1.2.1b| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Nearside Steering lock stop maladjusted |2.1.3| | 2 |
Brake pipe excessively corroded | 2 |
Motorcycle structure excessively corroded N/S frame under riders footrest |6.1.1a| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 2 |
Front brake disc in such a condition that it is seriously weakened | 2 |