>

MOT History from tests of petrol HONDA GOLDWINGs year 1980

Review the list of common HONDA GOLDWING failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:76.40%
(The average a petrol HONDA GOLDWING year 1980 passes without issue)
Based on:161 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment9
Offside Front shock absorber seal failed and leaking oil |2.3.3|4
Nearside Front shock absorber seal failed and leaking oil |2.3.3|3
Stop lamp remains on when the brakes are released3
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|2
Horn not working |1.6.2a|2
Rear Position lamp not working (4.2.1 (a))1
Front Position lamp not working (4.2.1 (a))1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h|1
Front Rear wheel rotation likely to be impeded |6.2.1b|1
Offside Front Brake hose inappropriately repaired |3.6.A.3|1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d|1
Offside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d|1
Nearside Rear position lamp|s| incorrect colour |1.1.A.3e|1
Offside Rear position lamp|s| incorrect colour |1.1.A.3e|1
Offside Rear fog lamp missing |1.3.2a|1
IMPORTANT. Do not use failure or PRS against this item. For lighting defects please enter 5000 in the `Find item` box above. |9.1|1
Nearside Rear reflector missing |1.5.1a|1
Offside Rear reflector missing |1.5.1a|1
Nearside Motorcycle structure has excessive corrosion which adversely affects braking or steering frame |6.1.1 |c| |ii||1
Front suspension has inadequate damping effect. |2.3.6c|1
Rear position lamp incorrect colour |1.1.2b|1
Front position lamp incorrect colour |1.1.2a|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Nearside Direction indicator affected by the operation of another lamp |1.5.1c|1
Offside Direction indicator affected by the operation of another lamp |1.5.1c|1
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii||1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Sidecar front position lamp does not illuminate immediately when it is switched on (1.1.3a)1
Headlamp insecure |1.2.3b|1
Nearside Front Direction indicator insecure |1.5.3b|1
Offside Front Direction indicator insecure |1.5.3b|1
Nearside Rear Direction indicator insecure |1.5.3b|1
Offside Rear Direction indicator insecure |1.5.3b|1
Rear wheel rotation likely to be impeded |6.2.1b|1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Brake component leaking fluid |3.2.B4|1
Exhaust is leaking and excessively noisey |7.1.1b|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Headlamp incorrect colour |1.2.1|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Rear Brake master cylinder insecurely mounted |3.2.B1a|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Handlebar mounting clamp loose |2.1.1a|1
Horn control defective |1.7.2a|1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Nearside Front Direction indicators not working |1.5.1c|1
Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Nearside Rear wheel bearing has excessive play |2.6.2|1
Front Front position lamp|s| not working |1.1.A.3b|1
Brake pedal anti-slip provision missing |3.3.A.1b|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Brake cylinder insecurely mounted |3.2.B1a|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy