Most common failures | No# failures |
---|
Headlamp aim out of alignment | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Nearside Headlamp switch faulty |1.2.4| | 1 |
Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front position lamp|s| missing |1.1.A.3a| | 1 |
Offside Front position lamp|s| missing |1.1.A.3a| | 1 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. swing arm |2.4.A.2d| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Registration plate lamp issues | 1 |
Front Fluid suspension unit totally deflated |2.4.D.1a| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Rear Direction indicator incomplete |1.5.A1b| | 1 |
Offside Front Brake pedal spongy |3.3.B.1b| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies lever |1.3.1a| | 1 |
Nearside Headlamp incorrect colour |1.2.1| | 1 |
Offside Headlamp incorrect colour |1.2.1| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear suspension has severe distortion of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |