| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 17 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 12 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
| Registration plate issues | 10 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Brake performance not tested |3.3| | 2 |
| Rear Motorcycle structure excessively corroded |6.1.1a| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Brake performance unable to be tested (1.2.1 (g)) | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Valve stem seriously damaged |4.1.D.1e| | 2 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Rear Horn emits 2 or more alternating tones |1.7.3b| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Front position lamp|s| not working |1.1.A.3b| | 1 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Nearside Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Offside Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Rear Axle insecure such that functionality is affected (5.1.1 (b) (ii)) | 1 |
| Rear Axle with loose fixing bolts (5.1.1 (b) (i)) | 1 |
| Rear Axle with an unsafe modification (5.1.1 (c) (i)) | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Front brake caliper has restricted free movement |3.5.1k| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Front Brake component has an inadequate repair |3.1.5| | 1 |
| Rear Brake component modification adversely affecting braking performance (1.1.21 (d) (ii)) | 1 |
| Front Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front position lamp incorrect colour BLUE |1.1.2a| | 1 |
| Front position lamp does not illuminate immediately when switched on LOWER |1.1.3a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Offside Upper Suspension attachment bracket/mounting insecure |5.3.3 |a| |i|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Nearside Rear Shock absorber insecure |2.7.2b| | 1 |
| Offside Rear Shock absorber insecure |2.7.2b| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Offside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Front Front position lamp incorrect colour |1.1.2a| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
| Offside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Service brake efficiency below requirements Wheel binding (1.2.2 (a) (i)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
| Parking brake lever is impeded in its travel |3.1.6c| | 1 |
| All position lamps not working |1.1.A.3b| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Offside Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock Bar mounted components fouling on screen. Bar lowers fouling on centre panels. (2.1.4 (b)) | 1 |
| Headlamp not working on dipped beam Bulb likely gone. High beam works. (4.1.1 (a) (ii)) | 1 |
| Brake performance unable to be tested not starting (1.2.1 (g)) | 1 |
| Rear Rear reflector missing both (4.8.2 (a) (ii)) | 1 |
| Brake hose damaged | 1 |
| Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Registration plate lamp issues | 1 |
| Nearside Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Nearside Direction indicator not working wont cancel properly (4.4.1 (a) (ii)) | 1 |
| Nearside Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Nearside Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected sticking (6.2.7 (a) (ii)) | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Stop lamp not working |1.2.1b| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Front Footrest insecure |9.6.1| | 1 |
| Offside Front Footrest insecure |9.6.1| | 1 |
| Nearside Rear Trikes, quads or pre-68 vehicles, service brake efficiency below requirements |3.7.B.7| | 1 |
| Nearside Rear Parking brake efficiency below requirements |3.7.B.7| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Front brake disc contaminated by oil |3.5.1h| | 1 |
| Additional braking device insecure |3.6.I.1| | 1 |
| Rear brake binding | 1 |
| Brake performance not tested |3.7.A.1| | 1 |
| An item not tested |Manual| | 1 |
| Nearside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Offside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Throttle operating incorrectly Returns to closed position at a slower rate than normal |6.2.1f| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake caliper leaking (1.1.16 (b) (i)) | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Brake caliper insecure |1.1.16 |c| |i|| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
| Nearside Rear Parking brake inoperative on one side |1.4.1 |a|| | 1 |
| Nearside Rear Service brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |