Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
Registration plate issues | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 5 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Front suspension has inadequate damping effect. |2.3.6c| | 4 |
Horn not working |1.7.3a| | 4 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
Front Roller brake test indicates a binding brake (3.3.A1a) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Nearside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Rear brake binding | 2 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Nearside Front Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Sidecar structure joining/attachment plate or fastening insecure (6.1.1 (b) (i)) | 1 |
Stop lamp not working when front lever is applied (4.3.1 (a) (ii)) | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Centre Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Stop lamp not working on both front and rear levers (4.3.1 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle sticks on lock to lock (6.2.7 (a) (ii)) | 1 |
Brake pedal has insufficient reserve travel rear brake not working at all (1.1.2 (a)) | 1 |
Brake cylinder leaking and braking performance affected rear brake master cylinder area (1.1.16 (b) (ii)) | 1 |
Nearside Rear Upper Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Rear Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Offside Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Sidecar wheel bearings have excessive free play (5.2.3c) | 1 |
Sidecar wheel bearings are excessively rough (5.2.3d) | 1 |
Nearside Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Offside Rear Direction indicators not working (1.5.1c) | 1 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Central Front Upper Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Offside Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c) | 1 |
Offside Rear Position lamp showing white light to the rear indicator lense damaged (4.2.3 (a) (ii)) | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Front Upper Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Offside Front Fuel system component leaking excessively or a risk of fire fuel pump (6.1.3 (b) (ii)) | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front suspension assembly component loose Offside fork leg top yoke bolt loose |2.3.1| | 1 |
Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Brake performance not tested |3.3| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced SWING ARM CORRODED |6.1.1 |c| |i|| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Shock absorber has a serious fluid leak L/H (5.3.2 (b)) | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
Rear All direction indicators adversely affected by the operation of another lamp both sides interacting with side lights (4.4.3 (b)) | 1 |
Headlamp aim not tested |1.6| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Offside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front shock absorber leaking oil |9.2.7b| | 1 |
Nearside Rear reflector missing side car (4.8.2 (a) (ii)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Nearside Front Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Front Front wheel bearings have excessive free play (2.3.5b) | 1 |
Stop lamp does not illuminate immediately a brake applies front brake lever switch not working (1.3.1a) | 1 |
Brake lever has inadequate reserve travel (3.1.3b) | 1 |
Front wheel bearings have excessive free play (2.3.5b) | 1 |
Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. (3.3.E1b) | 1 |
Nearside Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Upper Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front wheel insecure |4.2.3b| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Fuel hose leaking (6.1.3 (b) (i)) | 1 |
Nearside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Offside Brake rod excessively damaged and seriously weakened |3.5.1e| | 1 |
Offside Front Hand operated control valve leaking |3.2.1d| | 1 |
Nearside Rear Brake hose exposed to excessive heat |3.6.B.4f| | 1 |
Offside Rear Brake hose exposed to excessive heat |3.6.B.4f| | 1 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Front Fluid suspension unit leaking |2.4.D.2| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear parking brake recording little or no effort | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Brake hose damaged | 1 |
Offside Inner Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Direction indicator obscured |1.5.1a| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brakes imbalanced across an axle | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Nearside Front Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Offside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Braking system leaking |3.6.A.1| | 1 |
Front front brake binding |3.7.B.1| | 1 |
Horn not working |1.6.2a| | 1 |
Front brake caliper has restricted free movement |3.5.1k| | 1 |
front brake binding |3.7.B.1| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Shock absorber has a serious fluid leak |2.7.3| | 1 |