Most common failures | No# failures |
---|
Headlamp aim out of alignment | 25 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 14 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Throttle operating incorrectly |6.2.1f| | 5 |
Registration plate issues | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Lower Motorcycle structure excessively corroded |6.1.1a| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Brake lever insecure |3.1.2a| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Centre Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Centre Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Brake indicates excessive fluctuation of brake effort movement of six sections on brake tester indicating severe run out (1.2.1 (e)) | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Nearside Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front An item not tested |Manual| | 1 |
Rear An item not tested |Manual| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Nearside Front Brake pipe excessively damaged |3.2.B2a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear suspension bearing has excessive free play swing arm |2.4.A2a|i|| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake switch inoperative |1.3.1a| | 1 |
Steering lock stop ineffective front brake master cylinder restricting lock stop by hitting fairing screen |2.1.3| | 1 |
Front Wheel fixing loose (multiple fixings) (5.2.1 (a) (i)) | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Horn not working |1.7.3a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Front Front position lamp missing |1.1.1a| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 1 |
Offside Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Handlebar handgrip not secure to handlebars. loose grip |2.1.1c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside brake disc contaminated by oil |3.5.1h| | 1 |
Offside Shock absorber has a serious fluid leak |2.7.3| | 1 |
front brake binding |3.7.B.1| | 1 |
Registration plate lamp issues | 1 |
Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Brake performance not tested |3.7.A.1| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Nearside Rear Brake locking device missing |3.2.A1e| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Upper Brake hose excessively kinked |3.2.B3a| | 1 |
Nearside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Nearside Exhaust excessively deteriorated |7.1.1a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Position lamp not working sidecar |4.2.1 |a|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |