Most common failures | No# failures |
---|
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp aim out of alignment | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Horn control not functioning. |1.7.2b| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Motorcycle structure cracked |6.1.1a| | 1 |
Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Front An item not tested |Manual| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Sidecar rear red reflector missing |1.4.1| | 1 |
Front Sidecar front position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn not working |1.7.3a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Nearside Front Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Front suspension assembly component loose top yoke clamp bolts |2.3.1| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Upper Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Wheel modified significantly reducing the original strength |4.2.1a| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |