| Most common failures | No# failures |
|---|
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Headlamp aim out of alignment | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Registration plate issues | 6 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 6 |
| Rear reflector missing (4.8.2 (a) (ii)) | 6 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Central Rear Lower Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Rear Wheel fractured significantly reducing the original strength |4.2.1a| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Wheel corroded significantly reducing the original strength |4.2.1a| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Rear Brake component is fractured |3.1.5| | 1 |
| Rear Brake component is excessively corroded |3.1.5| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Front suspension assembly component cracked |2.3.1| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Headlamp aim beam image kick up to the offside (1.6) | 1 |
| Central Rear Rear reflector on motorcycle missing (1.4.1) | 1 |
| Rear Brake caliper inadequately mounted not in retaining bracket (1.1.16 (c) (i)) | 1 |