>

MOT History from tests of petrol HONDA FES250s year 2000

Review the list of common HONDA FES250 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:85.27%
(The average a petrol HONDA FES250 year 2000 passes without issue)
Based on:740 MOT Tests
Most common failuresNo# failures
Rear Brake lever has inadequate reserve travel |3.1.3b|14
Exhaust is leaking and excessively noisey |7.1.1b|11
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|7
Headlamp aim out of alignment6
Nearside Front shock absorber seal failed and leaking oil |2.3.3|3
Steering movement excessively `notchy` with the wheel raised |2.2.1b|3
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Registration plate issues3
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Offside Front shock absorber seal failed and leaking oil |2.3.3|3
Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||3
Nearside Brake lever has inadequate reserve travel |3.1.3b|3
Rear wheel bearings have excessive free play |2.4.A.2c|3
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|2
Front Roller brake test indicates a binding brake |3.3.A1a|2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Steering headbearing has excessive free play |2.2.2|2
Rear Hydraulic brake control feels spongy |3.1.4a|2
Front Stop lamp remains on when the brake is released |1.3.1e|1
Stop lamp not working On rear control |4.3.1 |a| |ii||1
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b|1
Centre Exhaust is leaking and excessively noisey |7.1.1b|1
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii))1
Offside Rear Rear suspension component loose |2.4.A.1a|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Stop lamp does not emit a steady light |1.3.1b|1
Offside Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Rear Brake lever has insufficient reserve travel (1.1.2 (a))1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Rear Wheel bearing has excessive play |5.1.3 |a| |i||1
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Offside Front Direction indicator damaged and function impaired |1.5.3a|1
Offside Front Direction indicator incorrect colour |1.5.1b|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Rear Roller brake test indicates a binding brake |3.3.A1a|1
Offside Front Upper Throttle operating incorrectly sticking (6.2.7 (a) (i))1
Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Rear Brake lever has insufficient reserve travel |1.1.2 |a||1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Rear position lamp incorrect colour |1.1.2b|1
Stop lamp emits other than a steady red light |1.3.1b|1
Rear Floor brake test indicates a binding brake |3.3.C2c|1
Rear Floor brake test indicates a sticking brake |3.3.C2c|1
Rear Brake grabbing severely (1.2.1 (c))1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Horn not working |1.7.3a|1
Headlamp switch faulty |1.2.4|1
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Wheel bearing rough when rotated (5.1.3 (b) (i))1
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Nearside Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f||1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Front Brake excessively binding (1.2.1 (f))1
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Offside Front Direction indicators not working |1.5.1c|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Nearside Front Direction indicators not working |1.5.1c|1
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Exhaust excessively deteriorated |7.1.1a|1
Rear Brake lever cannot be applied smoothly |3.1.3d|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Nearside Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Offside Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Front Front wheel bearings are excessively rough |2.3.5b|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Fuel cap missing |7.2.2a|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Front Shock absorber has a serious fluid leak Both |5.3.2 |b||1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Stop lamp remains on when the brakes are released1
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Front Motorcycle structure excessively damaged |6.1.1a|1
Rear Rear reflector on motorcycle dirty and function impaired |1.4.2a|1
Front shock absorber seal failed and leaking oil |2.3.3|1
Rear position lamp damaged and function impaired |1.1.1b|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy