Most common failures | No# failures |
---|
Steering headbearing has excessive free play |2.2.2| | 26 |
Headlamp aim out of alignment | 18 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 18 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 16 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Exhaust is leaking and excessively noisey |7.1.1b| | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Front Steering headbearing has excessive free play |2.2.2| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Front Brake disc|s| excessively worn |3.2.A1l| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Registration plate issues | 4 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 4 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 3 |
Front Valve stem seriously damaged |5.2.3 |j|| | 3 |
Front Brake excessively binding |1.2.1 |f|| | 3 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
Horn not working |1.7.3a| | 3 |
Indicator switch defective |1.5.4| | 3 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 3 |
Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Brake disc|s| cracked |3.2.A1g| | 3 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Upper Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Rear reflector on motorcycle dirty and function impaired |1.4.2a| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Nearside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Offside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Stop lamp not working when applying rear brake |4.3.1 |a| |ii|| | 1 |
Offside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Centre Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies BRAKE LEVER |1.3.1a| | 1 |
Rear Exhaust excessively deteriorated BLOWING FROM VARIOUS HOLES |7.1.1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls Left lever does not illuminate brake light. (4.3.2 (a) (iii)) | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Central Upper Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
Central Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Centre Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Direction indicator missing |4.4.1 |a| |ii|| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment rear brake hub lever out of adjustment |3.2.A1i| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Registration plate lamp issues | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Nearside Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front An item not tested |Manual| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
An item not tested |Manual| | 1 |
Central Front Upper Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Centre Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Headlamp switch faulty |1.2.4| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Front Brake pivot excessively worn Caliper sliding pin rubber missing |1.1.15 |b|| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake fluid contaminated (1.8 (a)) | 1 |
Rear Brake fluid contaminated (1.8 (a)) | 1 |