Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 47 |
Registration plate lamp issues | 34 |
Registration plate issues | 30 |
Headlamp aim out of alignment | 26 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 23 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 18 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 10 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 10 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 9 |
Front Brake disc|s| excessively worn |3.2.A1l| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 7 |
Stop lamp not working (4.3.1 (a) (ii)) | 7 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 7 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 6 |
Front Brake excessively binding (1.2.1 (f)) | 5 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
Horn not working |1.7.3a| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 5 |
Stop lamp remains on when the brakes are released | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front brake disc in such a condition that it is seriously weakened | 4 |
Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Offside Front Position lamp not working (4.2.1 (a)) | 4 |
Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Brake caliper|s| insecure |3.2.A1j| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Front Brake disc|s| cracked |3.2.A1g| | 2 |
Rear Brake caliper insecure |1.1.16 |c| |i|| | 2 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
All position lamps not working (4.2.1 (a)) | 2 |
Offside Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Front Brake lever has restricted free movement |1.1.15 |e|| | 2 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 2 |
Rear Exhaust mounting missing |7.1.1c| | 2 |
Stop lamp does not illuminate immediately a brake applies both controls |1.3.1a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Offside Rear Position lamp not working (4.2.1 (a)) | 2 |
Front Brake disc contaminated (1.1.14 (b)) | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Offside Front Position lamp not working |4.2.1 |a|| | 2 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
All direction indicators not working (4.4.1 (a) (ii)) | 2 |