Most common failures | No# failures |
---|
Headlamp aim out of alignment | 25 |
Registration plate issues | 10 |
Registration plate lamp issues | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Horn not working |1.7.3a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Stop lamp remains on when the brakes are released | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Inner Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Horn not working rear number plate lamp inop |1.7.3a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Centre Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Stop lamp does not illuminate immediately a brake applies front switch |1.3.1a| | 1 |
Suspension arm corroded and seriously weakened rear swinging arm (5.3.3 (b) (i)) | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake grabbing severely (1.2.1 (c)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Front Position lamp not working sidecar |4.2.1 |a|| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Lower Fuel hose leaking |7.2.1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Fuel pipe damaged Carb drain/overflow pipe split |No.2 carb|. |6.1.3 |c| |ii|| | 1 |
Offside Fuel pipe damaged Carb drain/overflow pipe split |No.4 carb|. |6.1.3 |c| |ii|| | 1 |
Offside Fuel pipe damaged Carb drain/overflow pipe split |No.6 carb|. |6.1.3 |c| |ii|| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Nearside Rear Shock absorber has a serious fluid leak dripping oil from base |5.3.2 |b|| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Nearside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Brake performance not tested |3.3| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Horn control defective |1.7.2a| | 1 |
Offside Front Steering lock stop ineffective |2.1.3| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Nearside Front Front position lamp insecure |1.1.1c| | 1 |
Offside Front Front position lamp insecure |1.1.1c| | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Centre Fuel hose leaking |7.2.1a| | 1 |
Throttle operating incorrectly sticking on ,on right lock (6.2.7 (a) (i)) | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Motorcycle structure adversely modified |6.1.1b| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |