Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 16 |
Registration plate issues | 14 |
Headlamp aim out of alignment | 14 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Drive chain excessively loose |6.2.1d| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Horn not working |1.7.3a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Offside Front Direction indicator missing |1.5.1a| | 3 |
Rear Direction indicator missing |1.5.1a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Front Direction indicator missing |1.5.1a| | 2 |
Nearside Rear Direction indicator missing |1.5.1a| | 2 |
Offside Rear Direction indicator missing |1.5.1a| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Direction indicator missing |1.5.1a| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Direction indicator missing |1.5.1a| | 2 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Horn emits 2 or more alternating tones |1.7.3b| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front position lamp does not illuminate immediately when switched on main beam |1.1.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Drive chain sprocket so loose it is likely to fail Sproket bolts rubbing on the swinging arm. (6.1.7 (c) (ii)) | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Footrest insecure |6.2.1a| | 1 |
Brake pedal mounting insecure |3.1.2a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Wheel spoke missing |4.2.1b| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp missing |4.3.1 |a| |ii|| | 1 |
Rear Brake component has an inadequate repair |3.1.5| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Headlamp damaged and function impaired |1.2.3a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Brake component has an inadequate repair |3.1.5| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Decelerometer brake test no brake control achieves an efficiency of 30% |3.3.E1a| | 1 |
Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Footrest missing both |6.2.12 |a|| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |