Most common failures | No# failures |
---|
Registration plate issues | 37 |
Rear reflector on motorcycle missing |1.4.1| | 17 |
Horn not working |1.7.3a| | 12 |
Headlamp aim out of alignment | 9 |
Rear Wheel spoke excessively loose |4.2.1b| | 6 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Horn missing |1.7.1| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Throttle operating incorrectly |6.2.1f| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Rear Stop lamp missing |1.3.3a| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Wheel spoke excessively loose Approx 10 spokes loose in rear wheel. (5.2.2 (d)) | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Horn replaced by a gong |1.7.3b| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Horn control defective |1.7.2a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Rear Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Offside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Centre Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Upper Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Rear Upper Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Headlamp missing |1.2.3a| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Front Direction indicator obscured |1.5.1a| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp missing |1.2.3a| | 1 |
Rear Headlamp missing |1.2.3a| | 1 |
Nearside Direction indicator missing |1.5.1a| | 1 |
Offside Direction indicator missing |1.5.1a| | 1 |
Front Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected rear brake pedal return spring missing |1.1.2 |b| |ii|| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Braking system does not have an approriate system/s fitted according to its age |3.1.1| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Rear reflector on motorcycle missing not fitted |1.4.1| | 1 |
Horn not working missing |7.7 |a| |ii|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Headlamp aim not tested |1.6| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |