Most common failures | No# failures |
---|
Headlamp aim out of alignment | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Brake grabbing severely (1.2.1 (c)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Rear Lower Brake locking device missing |3.2.A1e| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Valve stem seriously misaligned (5.2.3 (j)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Brake pedal insecure |3.1.2a| | 1 |
Registration plate issues | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Wheel fixing loose (multiple fixings) (5.2.1 (a) (i)) | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Floor brake test indicates a binding brake front brake binding |3.3.C2c| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement unable to open to check seal |7.2.2b| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Horn not working |1.7.3a| | 1 |