Most common failures | No# failures |
---|
Headlamp aim out of alignment | 33 |
Registration plate issues | 14 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Drive chain excessively loose |6.2.1d| | 9 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
Drive chain worn to excess |6.2.1e| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 7 |
Horn not working |1.7.3a| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Front wheel bearings have excessive free play |2.3.5b| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 6 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Offside Rear Footrest missing |6.2.1a| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Rear Brake locking device missing |3.2.A1e| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Headlamp insecure |1.2.3b| | 3 |
Offside Direction indicators not working |1.5.1c| | 3 |
Rear Drive chain worn to excess |6.2.1e| | 3 |
Handlebar deformed |2.1.1b| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Drive chain sprocket worn to excess |6.2.1e| | 3 |
Headlamp switch faulty |1.2.4| | 3 |
Riders seat insecure |6.2.1a| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake lever cannot be released smoothly |3.1.3d| | 2 |
Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Rear position lamp insecure |1.1.1c| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Centre Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Headlamp reflector seriously defective (4.1.1 (b) (ii)) | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Nearside Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear suspension component excessively bent |2.4.A.1a| | 1 |
Brake back plate insecure (1.1.14 (d)) | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Brake drum|s| securing bolt|s| loose |3.2.A1g| | 1 |
Offside Front Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Position lamp switch does not illuminate all position lamps with a single operation (4.2.2 (a)) | 1 |
Rear suspension has an inadequate repair of a load bearing member or its supporting structure. swing arm |2.4.A.2d| | 1 |
Brake locking device missing torque arm |3.2.A1e| | 1 |
Footrest insecure |6.2.1a| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced swinging arm rusted (6.1.1 (c) (i)) | 1 |
Offside Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front suspension assembly component missing |2.3.1| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
All direction indicators not working not flashing |4.4.1 |a| |ii|| | 1 |
Nearside Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced of frame as marked not repaired correctley |6.1.1 |c| |i|| | 1 |
Rear Suspension arm corroded and seriously weakened swing arm |5.3.3 |b| |i|| | 1 |
Rear Brake reaction bracket excessively corroded brake as marked |1.1.15 |b|| | 1 |
Rear Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake light |switch| |1.3.1a| | 1 |
Front shock absorber seal failed and leaking oil both front fork oil seals |2.3.3| | 1 |
Exhaust is leaking and excessively noisey holes in rear silencer |7.1.1b| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Stop lamp does not emit a steady light Brake light on flashes on when lever is first applied |1.3.1b| | 1 |
Exhaust excessively deteriorated Two into one section of collector rusted though and blowing |7.1.1a| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
Dipswitch does not operate immediately when selected on main beam |4.1.3 |b|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Stop lamp does not illuminate immediately a brake applies control 2 |1.3.1a| | 1 |
Offside Rear Exhaust mounting missing |7.1.1c| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Headlamp missing |1.2.3a| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Centre Rear Lower Rear wheel spindle loose |2.4.A.2b| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Centre Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
An item not tested |Manual| | 1 |
Rear Brake grabbing severely (1.2.1 (c)) | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced Frame several areas around centre stand mount |6.1.1 |c| |i|| | 1 |
Offside Rear Shock absorber insecurely attached Top shock mount on by half a thread |5.3.2 |a| |i|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Footrest missing Both rear (6.2.12 (a)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Nearside Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Handlebar grip insecure to handlebar l/h |2.2.1 |d| |ii|| | 1 |
Direction indicator likely to become detached l/h front |4.4.1 |c| |ii|| | 1 |
Wheel bearing rough when rotated front |5.1.3 |b| |i|| | 1 |