Most common failures | No# failures |
---|
Headlamp aim out of alignment | 39 |
Registration plate issues | 9 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 6 |
Offside Rear Direction indicator not working |1.5.1c| | 6 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Drive chain excessively tight |6.2.1d| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Drive chain worn to excess |6.2.1e| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Offside Rear Footrest missing |6.2.1a| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Horn not working |1.7.3a| | 4 |
Rear Footrest missing |6.2.1a| | 4 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Nearside Rear Footrest missing |6.2.1a| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Nearside Rear Footrest insecure |6.2.1a| | 3 |
Offside Rear Footrest insecure |6.2.1a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 3 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Rear Position lamp not working |4.2.1 |a|| | 3 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Riders seat insecure |6.2.1a| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Offside Rear Footrest insecure (6.2.12 (a)) | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Front position lamp insecure |1.1.1c| | 2 |
Drive chain worn to excess |6.1.7 |c| |i|| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Horn not working |1.7.3a| | 2 |
Front Throttle operating incorrectly |6.2.1f| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Fuel hose leaking |7.2.1a| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Position lamp not working |4.2.1 |a|| | 2 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 2 |
Offside Direction indicators not working |1.5.1c| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Suspension arm corroded and seriously weakened swinging arm (5.3.3 (b) (i)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Wheel spoke excessively loose |4.2.1b| | 1 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear brake support arm |6.2.1h| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Lower Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Throttle operating incorrectly sticking open |6.2.7 |a| |i|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Steering headbearing in such a condition that steering control is adversely affected VERY PRONOUCED NOTCH IN THE CENTRE (2.2.2 (f) (ii)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Front Exhaust has a major leak of exhaust gases DOWN PIPE JOINTS ARE LEAKING AT THE CYLINDER HEAD (6.1.2 (a)) | 1 |
Front Shock absorber insecurely attached forks have excess flex under load. (5.3.2 (a) (i)) | 1 |
Front Brake cable excessively corroded |3.2.A1b| | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Handlebar retaining device loose (2.2.1 (b) (i)) | 1 |
Position lamp switch does not operate in accordance with the requirements (4.2.2 (a)) | 1 |
Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Brake excessively binding RE SET REAR RETURN SPRING BUY NEW SPRING ON MECH (1.2.1 (f)) | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Fuel system component insecure No securing clips on fuel feed pipe. |7.2.1b| | 1 |
Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Brake lever attachment screws missing |3.1.2b| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Nearside Drive chain worn to excess |6.2.1e| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Offside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front Headlamp lens seriously defective Upside down! (4.1.1 (b) (ii)) | 1 |
Rear Suspension component mounting has an unsafe modification Nearside plus offside exhaust bolts too long & hitting swinging arm both sides! (5.3.3 (c) (i)) | 1 |
Rear Suspension arm corroded and seriously weakened Swinging arm holed & filler used in parts to cover rust holes! (5.3.3 (b) (i)) | 1 |
Rear Brake component insecure Brake anchor bolt splitpin missing! (1.1.21 (c)) | 1 |
Rear Drive chain sprocket so loose it is likely to fail Bolt insecure! (6.1.7 (c) (ii)) | 1 |
Rear Footrest missing Pillion footrests missing! (6.2.12 (a)) | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Offside Upper Motorcycle structure cracked |6.1.1a| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Front Front wheel spindle loose |2.3.3a| | 1 |
Front Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride split pin missing |6.2.1h| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Brake drum|s| insecure |3.2.A1g| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Central Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Rear suspension component excessively corroded. swing arm |2.4.A.1a| | 1 |
Front Headlamp lens seriously defective Bad earth in bulb holder/ changed bulb holder for new one (4.1.1 (b) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Offside Rear Footrest insecure |6.2.12 |a|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Headlamp aim not tested dipping sideways (4.1.2 (b)) | 1 |
Steering operation restricted in free movement from lock to lock throttle and clutch cables routed incorrectly (2.1.4 (c)) | 1 |
Offside Rear Brake locking device missing |3.2.A1e| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Brake hose excessively deteriorated | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Brake rod insecure On brake drum (1.1.15 (c)) | 1 |
Nearside Chain guard insecure (6.1.7 (i)) | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Throttle operating incorrectly sticking |6.2.1f| | 1 |
Throttle operating incorrectly throttle tube broken |6.2.1f| | 1 |
Throttle operating incorrectly cable routing dangerous |6.2.1f| | 1 |
Nearside Front Brake locking device missing lock nut missing from brake lever arm |3.2.A1e| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride torque arm split pin missing |6.2.1h| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Shock absorber has negligible damping effect Forks (5.3.2 (b)) | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Drive chain split link |6.2.1h| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Front Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear Lower Brake linkage excessively damaged |3.2.A1c| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Stop lamp not working with front brake lever |4.3.1 |a| |ii|| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Front Brake locking device missing brake lever pivot nut missing |3.2.A1e| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain split link clip incorrect direction |6.2.1h| | 1 |
Fuel pipe leaking tap to carburetor |7.2.1a| | 1 |
Fuel system component leaking tap leaking when operated |7.2.1a| | 1 |
Throttle operating incorrectly engine rpm not returning to idle when closed |engine racing| |6.2.1f| | 1 |
Registration plate lamp issues | 1 |
Drive chain horseshoe locking device incorrectly fitted Fitted in the wrong direction |6.1.7 |j| |i|| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Nearside Fuel tank leaking |7.2.1a| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Riders seat insecure cable tie on |6.2.1a| | 1 |
Offside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Rear Brake locking device missing back plate brace arm split pin missing |3.2.A1e| | 1 |
Front Brake locking device insecure brake arm missing nut and bolt |3.2.A1e| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. swinging arm |2.4.A.2d| | 1 |
Fuel system component leaking around fuel tap |7.2.1a| | 1 |
Nearside Handlebar retaining device loose |2.2.1 |b| |i|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Direction indicator insecure |1.5.3b| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |