| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 54 |
| Drive chain excessively loose |6.2.1d| | 15 |
| Registration plate issues | 14 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 13 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 12 |
| Steering headbearing has excessive free play |2.2.2| | 12 |
| Horn not working |1.7.3a| | 11 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 9 |
| Nearside Rear Footrest missing |6.2.1a| | 9 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Drive chain worn to excess |6.2.1e| | 8 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
| Offside Rear Footrest missing |6.2.1a| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 7 |
| Headlamp insecure |1.2.3b| | 6 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 6 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 6 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 6 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
| Rear Brake locking device missing |3.2.A1e| | 6 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
| Rear Footrest missing |6.2.1a| | 6 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 5 |
| Riders seat insecure |6.2.1a| | 5 |
| Fuel system component leaking |7.2.1a| | 4 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Drive chain excessively tight |6.2.1d| | 4 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Rear Drive chain excessively tight |6.2.1d| | 3 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 3 |
| Front Headlamp insecure |1.2.3b| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 3 |
| Rear Footrest insecure |6.2.1a| | 3 |
| Offside Direction indicators not working |1.5.1c| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 3 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Brake locking device missing |3.2.A1e| | 2 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 2 |
| Rear Motorcycle structure excessively corroded |6.1.1a| | 2 |
| Nearside Rear Footrest insecure |6.2.1a| | 2 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Front Brake lever insecure |3.1.2a| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Fuel tank leaking |7.2.1a| | 2 |
| Front Steering lock stop missing |2.1.3| | 2 |
| Nearside Drive chain excessively loose |6.2.1d| | 2 |
| Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Offside Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Direction indicator not working |1.5.1c| | 2 |
| Front Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
| Rear position lamp insecure |1.1.1c| | 2 |
| Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Motorcycle structure excessively corroded |6.1.1a| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 2 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
| Offside Rear Direction indicator insecure |1.5.3b| | 2 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Offside Rear Upper Brake locking device missing |3.2.A1e| | 2 |
| Drive chain worn to excess seized links (6.1.7 (c) (i)) | 1 |
| Drive chain so worn it is likely to fail chain link broken (6.1.7 (c) (ii)) | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Exhaust is leaking and excessively noisey cross pipe between down pipes |7.1.1b| | 1 |
| Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Direction indicator not working all |1.5.1c| | 1 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Brake lever mounting insecure |3.1.2a| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Brake back plate|s| insecure splitpin missing rear
arm
|3.2.A1j| | 1 |
| Rear Brake locking device insecure adjuster |3.2.A1e| | 1 |
| Direction indicators affected by the operation of another lamp all flash together |1.5.1c| | 1 |
| All position lamps adversely affected by the operation of another lamp brake light works side light |1.1.3b| | 1 |
| Stop lamp damaged and function impaired will not work with lights on |1.3.3a| | 1 |
| Front Rear wheel rotation likely to be impeded hits horn |6.2.1b| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking cables insecure |6.1.1c| | 1 |
| Rear Wheel spoke excessively bent |4.2.1b| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Inner Fuel system component leaking |7.2.1a| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Nearside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Upper Front suspension assembly component loose steering stem nut |2.3.1| | 1 |
| Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Outer Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
| Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Fuel system component insecure |7.2.1b| | 1 |
| Front suspension assembly component missing |2.3.1| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Front Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
| Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
| Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Inner Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Outer Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Centre Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Front Brake lever pivots excessively worn |3.1.3a| | 1 |
| Rear Rear position lamp insecure |1.1.1c| | 1 |
| Rear Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Indicator switch insecure |1.5.4| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Stop lamp not working Front brake lever. |4.3.1 |a| |ii|| | 1 |
| Rear Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected Split pin missing. |5.2.1 |c| |ii|| | 1 |
| Offside Front Brake lever has insufficient reserve travel Brake lever. |1.1.2 |a|| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Stop lamp not working Brake lever. |4.3.1 |a| |ii|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Offside Front Exhaust system insecure At cylinder head joint. |6.1.2 |a|| | 1 |
| Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Front Handlebar mounting so insecure that steering is adversely affected |2.2.1 |a| |ii|| | 1 |
| Nearside Front Shock absorber has negligible damping effect And stiff in operation. |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has negligible damping effect And stiff in operation. |5.3.2 |b|| | 1 |
| Chain guard insecure |6.1.7 |i|| | 1 |
| Rear Wheel fixing missing |single fixing| Wheel spindle split pin missing. |5.2.1 |a| |ii|| | 1 |
| Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Upper Brake locking device missing |3.2.A1e| | 1 |
| Nearside Front Headlamp switch insecure |1.2.4| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear suspension component loose axle |2.4.A.1a| | 1 |
| Nearside Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Front Headlamp insecure (4.1.1 (c)) | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Centre Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Nearside Rear Lower Footrest missing |6.2.12 |a|| | 1 |
| Offside Rear Lower Footrest missing |6.2.12 |a|| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Nearside Fuel tank leaking |7.2.1a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp affected by indicators |1.1.3b| | 1 |
| Rear position lamp missing number plate light |1.1.1a| | 1 |
| Handlebar handgrip missing |2.1.1c| | 1 |
| Throttle operating incorrectly throttle assy insecure |6.2.1f| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
| Brake locking device insecure rear brake torque arm |3.2.A1e| | 1 |
| Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Centre Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain link fitted wrong way around |6.2.1h| | 1 |
| Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Position lamp switch faulty |1.1.4a| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Brake lever attachment screws loose nut missing |3.1.2b| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride foot rest retaining pin |6.2.1h| | 1 |
| Rear Upper Brake locking device missing torque arm bolt |3.2.A1e| | 1 |
| Rear Brake locking device insecure brake rod attachment split pin |3.2.A1e| | 1 |
| Offside Rear Shock absorber likely to become detached (5.3.2 (a) (ii)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted fitted wrong way to direction of drive |6.1.7 |j| |i|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen No image |4.1.2 |a|| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Front Upper Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Nearside Footrest insecure pillion |6.2.1a| | 1 |
| Offside Footrest insecure pillion |6.2.1a| | 1 |
| Stop lamp remains on when the brake is released front brake cable siezed |1.3.1e| | 1 |
| Nearside Footrest missing pillion |6.2.1a| | 1 |
| Offside Footrest missing pillion |6.2.1a| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Brake component insecure Locking pin missing (1.1.21 (c)) | 1 |
| Front Wheel fixing missing |multiple fixings| axle split pin missing |5.2.1 |a| |i|| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Brake grabbing severely (1.2.1 (c)) | 1 |
| Offside Indicator switch defective |1.5.4| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Front Front suspension assembly component loose |2.3.1| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Front Brake component has an inadequate repair |3.1.5| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Front wheel spindle loose |2.3.3a| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| An item not tested |Manual| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Motorcycle structure adversely modified |6.1.1b| | 1 |
| Nearside Rear Motorcycle structure adversely modified |6.1.1b| | 1 |
| Front Motorcycle structure adversely modified |6.1.1b| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Front Exhaust has part of the system missing |7.1.1a| | 1 |
| Nearside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Rear Lower Brake locking device missing |3.2.A1e| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Offside Rear Lower Footrest insecure |6.2.1a| | 1 |
| Nearside Front Lower Footrest insecure |6.2.1a| | 1 |
| Nearside Rear Lower Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Offside Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Brake lever pivot has excessive free play foot pedel no secureing bolt (1.1.1 (b)) | 1 |
| Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
| Front Wheel spoke excessively corroded wheel (5.2.2 (d)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear An item not tested |Manual| | 1 |
| Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Brake pedal is inoperative |3.1.3c| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Handlebar handgrip missing |2.1.1c| | 1 |
| Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Wheel spindle locking device ineffective (5.2.1 (d)) | 1 |
| Front Brake hose stretched by steering movement |3.2.B3b| | 1 |
| Nearside Steering lock stop missing |2.1.3| | 1 |
| Offside Steering lock stop missing |2.1.3| | 1 |
| Nearside Front Front mudguard insecure |2.3.7| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Front Brake cable excessively corroded |3.2.A1b| | 1 |
| Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |