| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 65 |
| Rear reflector on motorcycle missing |1.4.1| | 25 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 19 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 16 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
| Drive chain excessively loose |6.2.1d| | 14 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 14 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 12 |
| Drive chain worn to excess |6.2.1e| | 12 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 11 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 11 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 10 |
| Registration plate issues | 10 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 7 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 7 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
| Steering headbearing has excessive free play |2.2.2| | 7 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 7 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 7 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Offside Rear Footrest missing |6.2.1a| | 6 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 6 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 6 |
| Rear Wheel spoke excessively loose |4.2.1b| | 6 |
| Handlebar deformed |2.1.1b| | 6 |
| Headlamp aim beam image kick up to the offside |1.6| | 6 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
| Rear Brake locking device missing |3.2.A1e| | 6 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Rear Drive chain excessively loose |6.2.1d| | 4 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 4 |
| Headlamp insecure |1.2.3b| | 4 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Rear reflector on motorcycle obscured |1.4.1| | 4 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Offside Rear Direction indicator insecure |1.5.3b| | 4 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Rear suspension component seized |2.4A2a|ii|| | 3 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 3 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Nearside Steering lock stop ineffective |2.1.3| | 3 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
| Rear mono-shock pivot seized |2.4.B.4| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Nearside Rear Footrest missing |6.2.1a| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
| Offside Rear Footrest insecure |6.2.1a| | 2 |
| Front Headlamp insecure |1.2.3b| | 2 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 2 |
| Rear Rear mono-shock pivot seized |2.4.B.4| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 2 |
| Horn not working |1.7.3a| | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Offside Rear Footrest missing |6.2.12 |a|| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Handlebar deformed |2.1.1b| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 2 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Position lamp not working |4.2.1 |a|| | 2 |
| Offside Front Steering lock stop ineffective |2.1.3| | 2 |
| Offside Steering lock stop ineffective |2.1.3| | 2 |
| Rear Drive chain worn to excess |6.2.1e| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Front Dipswitch does not operate immediately when selected on main beam head lamp tel tail showing dipped beam is full beam (4.1.3 (b)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Brake hose damaged | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Brake locking device insecure |3.2.A1e| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Rear Brake drum|s| securing bolt|s| loose |3.2.A1g| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Stop lamp not working Rear brake lamp switch needed adjusting. |4.3.1 |a| |ii|| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Rear Wheel spoke missing |4.2.1b| | 1 |
| Upper Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Drive chain excessively loose |6.2.1d| | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Direction indicators not working all indicators |1.5.1c| | 1 |
| Front Brake performance not tested not working |3.3| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
| Offside Front Lower Motorcycle structure is fractured and structural rigidity is significantly reduced Wheel spindle retaining cap fractured. (6.1.1 (a) (i)) | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Rear Footrest missing both sides |6.2.12 |a|| | 1 |
| An item not tested |Manual| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Front wheel insecure |4.2.3b| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Stop lamp does not illuminate immediately a brake applies With front brake |1.3.1a| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
| Front Wheel alignment incorrect which adversely affects the steering front wheel pointing to o/s, (rh) (2.4 (a)) | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
| Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Central Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| All direction indicators missing FRONT AND REAR MISSING (4.4.1 (a) (ii)) | 1 |
| Front Brake master cylinder severely damaged |3.2.B1b| | 1 |
| Front Motorcycle structure joining/attachment plate or fastening insecure Clutch lever mounting bolt insecure due to missing nut (6.1.1 (b) (i)) | 1 |
| Rear Drive chain sprocket so loose it is likely to fail Rear drive chain sprocket excessively loose on carrier (6.1.7 (c) (ii)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Engine mounting/bracket bracket missing (6.1.8 (a) (ii)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Nearside Fork yoke deformed |2.1.1b| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Brake component modification unsafe torque reaction bracket welded x2 times (1.1.21 (d) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Front Front wheel has a missing wheel nut|s| |4.2.3a| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Throttle operating incorrectly revving up on right lock (6.2.7 (a) (i)) | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Rear Motorcycle structure joining/attachment plate or fastening insecure rear torsion bar missing a locking devise (6.1.1 (b) (i)) | 1 |
| Front Brake lever excessively damaged |3.2.A1c| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Footrest missing both pillion footrests missing (6.2.12 (a)) | 1 |
| Offside Rear Brake locking device missing |3.2.A1e| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Rear Wheel spoke excessively corroded |4.2.1b| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Offside Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front suspension assembly component excessively bent |2.3.1| | 1 |
| Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Rear Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear position lamp missing |1.1.1a| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Stop lamp obscured |1.3.1c| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Offside Front Brake locking device insecure |3.2.A1e| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Rear reflector on motorcycle obscured |1.4.2b| | 1 |
| Nearside Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Inner Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Outer Front Upper Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Upper Fork yoke insecure nut loose (2.2.2 (d) (i)) | 1 |
| Rear Brake component inadequately mounted brake reaction arm not split pinned (1.1.21 (c)) | 1 |
| Front Position lamp switch insecure |1.1.4b| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Stop lamp not working foot pedal (4.3.1 (a) (ii)) | 1 |
| Rear position lamp incorrect colour rear lens missing |1.1.2b| | 1 |
| Nearside Inner Rear Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front position lamp deteriorated and function impaired Reflector deteriorated. |1.1.1b| | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Brake performance not tested |1.2.1 |g|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Steering lock stop missing |2.1.3| | 1 |
| Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Upper Direction indicators not working |1.5.1c| | 1 |
| Offside Steering lock stop missing |2.1.3| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Steering operation restricted in free movement from lock to lock by fixing of l plate (2.1.4 (c)) | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Steering linkage locking device ineffective (2.1.3 (d)) | 1 |
| Offside Steering linkage locking device ineffective (2.1.3 (d)) | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Brake component cracked and seriously reduced in strength master cylinder damaged |3.2.A1| | 1 |
| Front Brake component defective due to a deliberate modification which significantly reduces the original strength bolt holding lever |3.1.5| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies right front brake switch missing |1.3.1a| | 1 |
| Rear wheel insecure rear off side spacer |4.2.3b| | 1 |
| Rear suspension movement is excessively stiff rear shock not working |2.4.A.3b| | 1 |
| Fairings insecure and likely to impede the steering front mudguard loose |2.1.2e| | 1 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies leaver |1.3.1a| | 1 |