| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 13 |
| Steering headbearing has excessive free play |2.2.2| | 12 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 8 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Horn not working |1.7.3a| | 4 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
| Registration plate issues | 4 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Registration plate lamp issues | 2 |
| Brake pipe excessively corroded | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Centre Motorcycle structure excessively corroded |6.1.1a| | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Brake lever is inoperative |3.1.3c| | 1 |
| Handlebar mounting so insecure that steering is adversely affected |2.2.1 |a| |ii|| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Offside Front Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Rear Statutory seat belt missing |5.1.1| | 1 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
| Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
| Centre Exhaust excessively deteriorated pipe to silencer |7.1.1a| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Rear Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Direction indicator insecure |1.5.3b| | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Rear Rear fog lamp not working |1.3.2b| | 1 |
| Front Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Steering wheel in a condition likely to injure the driver`s hands |2.1.1| | 1 |
| Position lamp switch cannot be operated from the normal driving position |1.1.A.1| | 1 |
| Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 1 |
| Nearside Front Coil spring not correctly located |2.4.C.2| | 1 |
| Nearside Rear Coil spring not correctly located |2.4.C.2| | 1 |
| Offside Rear Coil spring not correctly located |2.4.C.2| | 1 |
| Offside Front Coil spring not correctly located |2.4.C.2| | 1 |
| Nearside Front coil spring incomplete |2.4.C.1a| | 1 |
| Nearside Rear coil spring incomplete |2.4.C.1a| | 1 |
| Offside Front coil spring incomplete |2.4.C.1a| | 1 |
| Offside Rear coil spring incomplete |2.4.C.1a| | 1 |
| Nearside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
| Offside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
| Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly |2.5.B.1b| | 1 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Lower Rear suspension component loose |2.4.A.1a| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Lower Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Front Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Centre Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
| Rear wheel has a loose wheel bolt|s| |4.2.3a| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Steering control handlebar movement restricted by cables caught on a projection mirror |2.1.2c| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
| Rear Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
| Front Brake component has an inadequate repair |3.1.5| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
| Rear fog lamp switch missing (4.5.3 (a)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Brake performance not tested |3.3| | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Centre Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Horn sound not in accordance with requirements horn is harsh |7.7 |c|| | 1 |
| Rear Stop lamp not working bulb blown |4.3.1 |a| |ii|| | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls Brake light does not illuminate when the front brake lever is pulled (4.3.2 (a) (iii)) | 1 |
| Headlamp aim projected beam image obviously incorrect No beam pattern from the headlight (4.1.2 (c)) | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Brake lever is inoperative |3.1.3c| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Front Brake locking device insecure |3.2.A1e| | 1 |
| Brake lever attachment screws loose |3.1.2b| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Stop lamp light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
| Rear Stop lamp light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Front Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Offside Rear Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Centre Rear Rear position lamp insecure |1.1.1c| | 1 |
| Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Centre Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Centre Front Indicator tell tale not functioning |1.5.2| | 1 |
| Rear Brake lever cracked |3.1.2c| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Front Steering lock stop ineffective |2.1.3| | 1 |