| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 13 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
| Steering headbearing has excessive free play |2.2.2| | 8 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
| Riders seat insecure |6.2.1a| | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Registration plate issues | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Horn not working |1.7.3a| | 4 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 4 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear wheel insecure |4.2.3b| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Rear Brake lever cannot be released smoothly |3.1.3d| | 2 |
| Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 2 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front suspension has excessive stiffness in the suspension movement. seized |2.3.6b| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear brake switch n/w |1.3.1a| | 1 |
| Rear Rear position lamp insecure |1.1.1c| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Brake performance not tested |3.3| | 1 |
| Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Fork yoke deformed |2.1.1b| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Rear wheel insecure |4.2.3b| | 1 |
| Rear Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| All direction indicators light intensity significantly reduced (4.4.3 (a)) | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Rear fog lamp switch missing (4.5.3 (a)) | 1 |
| Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 1 |
| Front Wheel spoke missing |4.2.1b| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Offside Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Throttle operating incorrectly Not returning |6.2.1f| | 1 |
| Direction indicator flashing more than 120 times per minute All. |1.5.1c| | 1 |
| Offside Throttle operating incorrectly |6.2.1f| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Nearside Front Brake lever excessively damaged |3.2.A1c| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear suspension component seized |2.4A2a|ii|| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Offside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| An item not tested |Manual| | 1 |
| Throttle operating incorrectly revs up on its own randomly |6.2.1f| | 1 |
| Fairings insecure and likely to impede the steering front mudguard insecure and contacts frame when turning lock to lock |2.1.2e| | 1 |
| Front Brake lever attachment screws loose bolt appears loose and lock nut missing |3.1.2b| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded brake locks on after release of lever pressure |3.2.A1h| | 1 |
| Offside Rear spring incomplete |2.4.A1b|i|| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front mudguard can easily contact any fixed point of the motor bicycle. |2.3.7| | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Rear Brake lever mounting insecure |3.1.2a| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Rear wheel spindle loose suspect threads damaged |2.4.A.2b| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Brake linkage excessively corroded |3.2.A1c| | 1 |
| Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Nearside Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Offside Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Motorcycle structure cracked |6.1.1a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |