Most common failures | No# failures |
---|
Headlamp aim out of alignment | 28 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Registration plate issues | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Drive chain excessively tight |6.2.1d| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Horn not working |1.7.3a| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Fuel cap sealing washer deteriorated |7.2.2c| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Brake locking device missing rear brake torque arm no split pin |3.2.A1e| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Steering lock stop missing |2.1.3| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Registration plate lamp issues | 1 |
Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Lower Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Fuel system component insecure petrol tank |7.2.1b| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Upper Throttle operating incorrectly |6.2.1f| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
Brake pedal mounting insecure |3.1.2a| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Rear Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Offside Front Front suspension assembly component loose |2.3.1| | 1 |
Front Chain guard insecure |6.2.1c| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Brake component insecure Nut and security pin missing from torque reaction arm - rear brake (1.1.21 (c)) | 1 |
Centre Rear Lower Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Front Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Suspension arm corroded and seriously weakened swingarm (5.3.3 (b) (i)) | 1 |
Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Lower Drive chain excessively tight |6.2.1d| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Front Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Front Lower Brake locking device insecure |3.2.A1e| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp aim not tested |1.6| | 1 |
Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Central Rear All position lamps not working (4.2.1 (a)) | 1 |
Central Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Offside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Front Upper Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Front An item not tested |Manual| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Exhaust system insecure (6.1.2 (a)) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |