| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 56 |
| Drive chain excessively loose |6.2.1d| | 17 |
| Registration plate issues | 15 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 10 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 8 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 8 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Rear reflector on motorcycle missing |1.4.1| | 5 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Nearside Front Direction indicator not working |1.5.1c| | 5 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 5 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Horn not working |1.7.3a| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 4 |
| Rear Position lamp not working (4.2.1 (a)) | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Position lamp not working (4.2.1 (a)) | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 2 |
| Brake pedal mounting insecure |3.1.2a| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Rear Brake caliper inadequately mounted and braking performance affected (1.1.16 (c) (ii)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Offside Front Direction indicator insecure |1.5.3b| | 2 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
| Nearside Front Direction indicator insecure |1.5.3b| | 2 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
| Offside Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 2 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Registration plate lamp issues | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Indicator switch does not operate the direction indicators on the side selected switch does not feel positive, and indicators do not work every time switch is operated,although indicators do work. |1.5.4| | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Brake performance unable to be tested Incorrectly fitted rear brake caliper (1.2.1 (g)) | 1 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Centre Front Upper Horn not working |1.7.3a| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Fuel pipe union leaking |7.2.1a| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Indicator switch inoperative Not working on Left Turn. |4.4.2 |a| |ii|| | 1 |
| Stop lamp not working front brake light switch not working (4.3.1 (a) (ii)) | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Inner Front Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Drive chain so worn it is likely to fail chain fouling main stand (6.1.7 (c) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Rear Brake disc fractured |1.1.14 |a| |ii|| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Fuel tank insecure (6.1.3 (a) (i)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Brake disc contaminated (1.1.14 (b)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Brake performance unable to be tested Rear brake not securely fitted into the locating tab! (1.2.1 (g)) | 1 |
| Nearside Front shock absorber seal failed and leaking oil L/H |2.3.3| | 1 |
| Offside Front shock absorber seal failed and leaking oil R/H |2.3.3| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Brake hose which buldges Rear brake caliper hose. |3.2.B4| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Rear Brake disc significantly and obviously worn Below minimum thickness of 4.0mm (measures 3.47mm) (1.1.14 (a) (i)) | 1 |
| Offside Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Steering operation impeded by a fairing (2.1.4 (e)) | 1 |
| Front Direction indicator not working Both front indicator inoperative (4.4.1 (a) (ii)) | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Centre Front Direction indicator not working |1.5.1c| | 1 |
| Centre Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Brake caliper inadequately mounted (1.1.16 (c) (i)) | 1 |
| Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
| Steering operation restricted in free movement from lock to lock Brake hose trapped between lock-stop. (2.1.4 (c)) | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Offside Front Brake disc contaminated contaminated with fork oil (1.1.14 (b)) | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Nearside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
| Front Brake lever mounting cracked |3.1.2c| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Brake performance not tested |3.3| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Brake caliper inadequately mounted |1.1.16 |c| |i|| | 1 |
| Nearside Rear Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Drive chain excessively loose hitting centre stand |6.1.7 |c| |i|| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Nearside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a)) | 1 |
| Central Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Offside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear All position lamps do not illuminate immediately when switched on Failed bulb |1.1.3a| | 1 |
| Lower Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |