>

MOT History from tests of petrol HONDA CBR600Fs year 1992

Review the list of common HONDA CBR600F failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:77.91%
(The average a petrol HONDA CBR600F year 1992 passes without issue)
Based on:5,074 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment129
Front Roller brake test indicates a binding brake |3.3.A1a|91
Registration plate issues79
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|56
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|45
Throttle operating incorrectly |6.2.1f|44
Drive chain excessively loose |6.2.1d|40
Headlamp aim beam image kick up to the offside |1.6|36
Nearside Front shock absorber seal failed and leaking oil |2.3.3|34
Stop lamp does not illuminate immediately a brake applies |1.3.1a|33
Offside Front shock absorber seal failed and leaking oil |2.3.3|33
Front Floor brake test indicates a binding brake |3.3.C2c|31
Rear wheel bearings have excessive free play |2.4.A.2c|30
Front wheel bearings are excessively rough |2.3.5b|29
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|29
Front wheel bearings have excessive free play |2.3.5b|29
Steering headbearing has excessive free play |2.2.2|27
Front position lamp does not illuminate immediately when switched on |1.1.3a|25
Rear Brake disc|s| cracked |3.2.A1g|24
Steering movement excessively `notchy` with the wheel raised |2.2.1b|23
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|22
Rear reflector on motorcycle missing |1.4.1|21
Exhaust is leaking and excessively noisey |7.1.1b|21
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|19
Horn not working |1.7.3a|18
Front shock absorber seal failed and leaking oil |2.3.3|17
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|17
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||15
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|14
Drive chain worn to excess |6.2.1e|14
Wheel alignment incorrect which adversely affects the handling |2.5.1|14
Exhaust markings indicating not for road use or similar wording |7.1.4|13
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|13
Offside Front Brake disc|s| cracked |3.2.A1g|13
Drive chain excessively tight |6.2.1d|13
Front Front wheel bearings have excessive free play |2.3.5b|12
Front Front shock absorber seal failed and leaking oil |2.3.3|11
Front Floor brake test indicates a sticking brake |3.3.C2c|10
Front suspension has inadequate damping effect. |2.3.6c|10
Rear Drive chain sprocket worn to excess |6.2.1e|9
Front Brake excessively binding (1.2.1 (f))9
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|9
Front Roller brake test indicates a sticking brake |3.3.A1a|8
Front Headlamp aim beam image kick up to the offside |1.6|8
Riders seat insecure |6.2.1a|8
Front Exhaust is leaking and excessively noisey |7.1.1b|8
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||7
Front Front wheel bearings are excessively rough |2.3.5b|7
Nearside Front Direction indicator not working |1.5.1c|7
Nearside Front Brake disc|s| cracked |3.2.A1g|7
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|7
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|7
Rear Rear reflector on motorcycle missing |1.4.1|7
Exhaust excessively deteriorated |7.1.1a|7
Rear shock absorber has inadequate damping effect. |2.4.A.3b|7
Stop lamp remains on when the brake is released |1.3.1e|6
Nearside Front Brake disc|s| excessively worn |3.2.A1l|6
Rear Brake disc|s| excessively worn |3.2.A1l|6
Direction indicators flashing more than 120 times per minute |1.5.1c|6
Offside Front Direction indicator not working |1.5.1c|6
Front Roller brake test indicates a severely juddering brake |3.3.A1b|6
Drive chain sprocket carrier worn to excess |6.2.1e|5
Offside Front Brake disc|s| excessively worn |3.2.A1l|5
Offside Rear Footrest insecure |6.2.1a|5
Nearside Rear Direction indicators not working |1.5.1c|5
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|5
Rear Brake disc|s| excessively pitted |3.2.A1l|5
Front Brake pipe inadequately supported |3.2.B2b|5
Front Brake disc|s| excessively worn |3.2.A1l|5
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|5
Exhaust mounting does not fully support the exhaust system |7.1.1.c|5
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))5
Steering movement excessively stiff with the wheel raised |2.2.1b|5
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|5
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|5
Rear Roller brake test indicates a binding brake |3.3.A1a|4
Front position lamp incorrect colour |1.1.2a|4
Exhaust has part of the system missing |7.1.1a|4
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||4
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||4
Rear Drive chain worn to excess |6.2.1e|4
Nearside Front Brake disc|s| excessively pitted |3.2.A1l|4
Front Headlamp aim beam image kick-up is to the offside |1.6.1|4
Nearside Rear Direction indicator not working |1.5.1c|4
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|4
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|4
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j|4
Front Brake lever cannot be applied smoothly |3.1.3d|4
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|4
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|4
Wheel alignment incorrect which adversely affects the steering |2.5.1|4
Nearside Rear Footrest missing |6.2.1a|4
Brake hose damaged4
Nearside Front Footrest insecure |6.2.1a|4
Rear Brake pedal pivots excessively worn |3.1.3a|4
Front Stop lamp not working (4.3.1 (a) (ii))4
Front Position lamp not working (4.2.1 (a))4
Front Wheel bearing has excessive play (5.1.3 (a) (i))4

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy