MOT History from tests of petrol HONDA CBR400s year 1988

Review the list of common HONDA CBR400 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:68.88%

(The average a petrol HONDA CBR400 year 1988 passes without issue)

Based on:1,343 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	63
Rear reflector on motorcycle missing \|1.4.1\|	53
Registration plate issues	42
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	31
Front Roller brake test indicates a binding brake \|3.3.A1a\|	23
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	23
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	18
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	16
Rear wheel bearings have excessive free play \|2.4.A.2c\|	16
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	16
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	14
Exhaust is leaking and excessively noisey \|7.1.1b\|	13
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	13
Horn not working \|1.7.3a\|	12
Front wheel bearings have excessive free play \|2.3.5b\|	11
Drive chain excessively loose \|6.2.1d\|	11
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	11
Front wheel bearings are excessively rough \|2.3.5b\|	10
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	9
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	9
Offside Front Footrest insecure \|6.2.1a\|	8
Throttle operating incorrectly \|6.2.1f\|	8
Front shock absorber seal failed and leaking oil \|2.3.3\|	8
Drive chain worn to excess \|6.2.1e\|	7
Rear Footrest missing \|6.2.1a\|	7
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	6
Nearside Rear Footrest missing \|6.2.1a\|	6
Offside Rear Footrest missing \|6.2.1a\|	6
Nearside Rear Direction indicators not working \|1.5.1c\|	6
Drive chain excessively tight \|6.2.1d\|	6
Rear Brake disc\|s\| cracked \|3.2.A1g\|	6
Steering headbearing has excessive free play \|2.2.2\|	6
Offside Front Brake disc\|s\| cracked \|3.2.A1g\|	5
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	5
Offside Steering lock stop ineffective \|2.1.3\|	5
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	5
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	5
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	5
Rear Drive chain sprocket worn to excess \|6.2.1e\|	5
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Front Floor brake test indicates a binding brake \|3.3.C2c\|	5
Nearside Front Brake disc\|s\| cracked \|3.2.A1g\|	5
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	4
Nearside Front Footrest insecure \|6.2.1a\|	4
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	4
Drive chain sprocket carrier worn to excess \|6.2.1e\|	4
Rear reflector missing (4.8.2 (a) (ii))	4
Offside Footrest insecure \|6.2.1a\|	4
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Offside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	4
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	4
Rear Rear reflector on motorcycle missing \|1.4.1\|	4
Centre Rear Rear reflector on motorcycle missing \|1.4.1\|	4
Front Front wheel bearings have excessive free play \|2.3.5b\|	4
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	4
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	4
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	4
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Front Stop lamp remains on when the brake is released \|1.3.1e\|	3
Front suspension has inadequate damping effect. \|2.3.6c\|	3
Fuel hose leaking \|7.2.1a\|	3
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	3
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	3
Brake hose damaged	3
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	3
Fuel system component leaking \|7.2.1a\|	3
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	3
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	3
Front Brake excessively binding (1.2.1 (f))	3
Throttle operating incorrectly (6.2.7 (a) (i))	3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	3
Front Direction indicators affected by the operation of another lamp \|1.5.1c\|	3
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	3
Nearside Front Direction indicator not working \|1.5.1c\|	3
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Rear Brake locking device missing \|3.2.A1e\|	2
Offside Front Direction indicator not working \|1.5.1c\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Direction indicators not working \|1.5.1c\|	2
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Nearside Steering lock stop ineffective \|2.1.3\|	2
Nearside Footrest insecure \|6.2.1a\|	2
An item not tested \|Manual\|	2
Drive chain excessively loose (6.1.7 (c) (i))	2
Front Steering headbearing has excessive free play \|2.2.2\|	2
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))	2
Front Throttle operating incorrectly \|6.2.1f\|	2
Rear brake disc in such a condition that it is seriously weakened	2
Drive chain excessively tight (6.1.7 (k) (i))	2
Front Wheel excessively distorted (5.2.2 (c) (i))	2
Roller brake test indicates a binding brake Front \|3.3.A1a\|	2
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	2
Direction indicator not working \|1.5.1c\|	2
Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Front Direction indicator not working \|1.5.1c\|	2
Rear Direction indicator not working \|1.5.1c\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Front Headlamp aim beam image too far to the right \|1.6.4\|	2
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Offside Rear Brake pedal insecure \|3.1.2a\|	2
Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Front Valve stem seriously damaged (5.2.3 (j))	2
Rear Valve stem seriously damaged (5.2.3 (j))	2
Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front mudguard insecure \|2.3.7\|	2
Offside Front Direction indicators not working \|1.5.1c\|	2
Offside Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	63
Rear reflector on motorcycle missing \|1.4.1\|	53
Registration plate issues	42
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	31
Front Roller brake test indicates a binding brake \|3.3.A1a\|	23
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	23
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	18
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	16
Rear wheel bearings have excessive free play \|2.4.A.2c\|	16
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	16
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	14
Exhaust is leaking and excessively noisey \|7.1.1b\|	13
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	13
Horn not working \|1.7.3a\|	12
Front wheel bearings have excessive free play \|2.3.5b\|	11
Drive chain excessively loose \|6.2.1d\|	11
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	11
Front wheel bearings are excessively rough \|2.3.5b\|	10
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	9
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	9
Offside Front Footrest insecure \|6.2.1a\|	8
Throttle operating incorrectly \|6.2.1f\|	8
Front shock absorber seal failed and leaking oil \|2.3.3\|	8
Drive chain worn to excess \|6.2.1e\|	7
Rear Footrest missing \|6.2.1a\|	7
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	6
Nearside Rear Footrest missing \|6.2.1a\|	6
Offside Rear Footrest missing \|6.2.1a\|	6
Nearside Rear Direction indicators not working \|1.5.1c\|	6
Drive chain excessively tight \|6.2.1d\|	6
Rear Brake disc\|s\| cracked \|3.2.A1g\|	6
Steering headbearing has excessive free play \|2.2.2\|	6
Offside Front Brake disc\|s\| cracked \|3.2.A1g\|	5
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	5
Offside Steering lock stop ineffective \|2.1.3\|	5
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Steering control fouling between components which interferes with the free movement of the steering \|2.1.2a\|	5
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	5
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	5
Rear Drive chain sprocket worn to excess \|6.2.1e\|	5
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	5
Front Floor brake test indicates a binding brake \|3.3.C2c\|	5
Nearside Front Brake disc\|s\| cracked \|3.2.A1g\|	5
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	4
Nearside Front Footrest insecure \|6.2.1a\|	4
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	4
Drive chain sprocket carrier worn to excess \|6.2.1e\|	4
Rear reflector missing (4.8.2 (a) (ii))	4
Offside Footrest insecure \|6.2.1a\|	4
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	4
Offside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	4
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	4
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	4
Rear Rear reflector on motorcycle missing \|1.4.1\|	4
Centre Rear Rear reflector on motorcycle missing \|1.4.1\|	4
Front Front wheel bearings have excessive free play \|2.3.5b\|	4
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	4
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	4
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	4
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	3
Front Stop lamp remains on when the brake is released \|1.3.1e\|	3
Front suspension has inadequate damping effect. \|2.3.6c\|	3
Fuel hose leaking \|7.2.1a\|	3
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	3
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	3
Brake hose damaged	3
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	3
Fuel system component leaking \|7.2.1a\|	3
Front Wheel bearing rough when rotated (5.1.3 (b) (i))	3
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	3
Front Brake excessively binding (1.2.1 (f))	3
Throttle operating incorrectly (6.2.7 (a) (i))	3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	3
Front Direction indicators affected by the operation of another lamp \|1.5.1c\|	3
Rear Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	3
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	3
Nearside Front Direction indicator not working \|1.5.1c\|	3
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Rear Brake locking device missing \|3.2.A1e\|	2
Offside Front Direction indicator not working \|1.5.1c\|	2
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Direction indicators not working \|1.5.1c\|	2
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Nearside Steering lock stop ineffective \|2.1.3\|	2
Nearside Footrest insecure \|6.2.1a\|	2
An item not tested \|Manual\|	2
Drive chain excessively loose (6.1.7 (c) (i))	2
Front Steering headbearing has excessive free play \|2.2.2\|	2
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))	2
Front Throttle operating incorrectly \|6.2.1f\|	2
Rear brake disc in such a condition that it is seriously weakened	2
Drive chain excessively tight (6.1.7 (k) (i))	2
Front Wheel excessively distorted (5.2.2 (c) (i))	2
Roller brake test indicates a binding brake Front \|3.3.A1a\|	2
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	2
Direction indicator not working \|1.5.1c\|	2
Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Front Direction indicator not working \|1.5.1c\|	2
Rear Direction indicator not working \|1.5.1c\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Front Headlamp aim beam image too far to the right \|1.6.4\|	2
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Exhaust excessively deteriorated \|7.1.1a\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Offside Rear Brake pedal insecure \|3.1.2a\|	2
Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Front Valve stem seriously damaged (5.2.3 (j))	2
Rear Valve stem seriously damaged (5.2.3 (j))	2
Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front mudguard insecure \|2.3.7\|	2
Offside Front Direction indicators not working \|1.5.1c\|	2
Offside Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2

MOT History from tests of petrol HONDA CBR400s year 1988

Find us on Facebook